TEST-630 GFUVE Multi Phase Protective Relay Test System with Distance Protection Calibration
Test-630 Multi Phase Protective Relay Test System
is a six phase current output and six phase voltage output protection relay tester with 5.Eight pairs of binary input and four pairs of binary output.
The TEST-630 Multi Phase Protective Relay Test System is a multipurpose, light-weight, field portable test set capable of testing a wide variety of electro-mechanical, solid state and microprocessor-based protective relays, motor overload relays, and similar protective devices.
The unit can be operated either manually via the built-in 8.4' screen user interface, or placed under full computer control via the GFUVE PC SOFTWARE, Advanced Visual Testing Software, or the GFUVE-software running on a PC. In addition, with the open communication architecture, the unit can also be used with eight-party software programs.
It incorporates a large, easy to read full color, high resolution, high definition, TFT LCD screen display, which displays metered values such as AC and DC Amperes, AC and DC Volts, and Time in both seconds and cycles. Depending on the type of test selected, other values may be displayed, such as Phase Angle, Frequency, Ohms, Watts, VA, or Power Factor.
FEATURES
- Integration in the host crystal 8.4 inches true color, light weight and easy to carry.
- Built-in high-speed and high-performance industrial computer embedded operating system, running stable and reliable, also can test by connecting PC.
- Panel embedded user-friendly buttons, and the panel can also be an external keyboard and mouse.
- High-precision DAC to 12 Road, simultaneously output to ensure the high precision and good linearity of the waveform.
- 5Matching electromagnetic compatibility components, can improve on-site anti-electromagnetic interference, protection devices can connect the electromagnetic compatibility to test.
- Analog output of the front panel, switch the amount of terminal design in the upper cover, all the wiring does not affect the operation of the panels and the test parameters of the surveillance.
- The latest thermal structure design to ensure the best ventilation. Automatically determine over current, over voltage, overload and short circuit, if the temperature is too high, the anomalies and misuse warning of the data will show up promptly.
- Using voltage, current amplifier AC / DC sharing, output stage uses a unique ultra-linear amplifier technology, high precision and reliability. six-phase AC output voltage and six-phase AC current.
- 12 analog ports and other optional auxiliary DC source output (220V/110V).
- Interface: RJ45 (Ethernet interface), USB interface (software upgrades, reporting transmission), industrial serial interface (GPS or other serial device use).
OVERVIEW
- Six-channel current output
- Six-channel voltage output
- Eight pairs of binary input
- Four pairs of binary output
FUNCTIONS
- Host real-time operating system, fast response, when faced with an emergency situation, can better protect the instruments and equipment under test. Safe and reliable, not easy to be violated by a computer virus.
- The newly designed software interface style, the host machine operation is fully consistent with the background and easy to use.
- Extensive testing capabilities: the state sequence will be determined to meet the needs of various types of user for testing microprocessor-based protection relay in the trial, IT features analog oscillation, the entire group of tests, differential protection, harmonic superposition, low cycle load shedding, same equipment, measuring instruments, GPS synchronized debugging, fault playback, and custom test (special tests), etc. It can easily complete the protective device test of ABB, Siemens, AREVA and other foreign manufacturers.
- The test report can be easily derived from the USB port to print.
TEST ITEM
- U/I Test
- DC Test
- Impedance Characteristics
- Power Direction Test
- I-T Test
- Differential Relay
- Harmonic Test
- Differential Protection
- Distance Protection
- Zero Sequence Protection
- Setting Group Test
- State Sequence
- Synchronization Test
- Special Test
- Oscillation Test
- Metering Instrument
- Hardware Checkout
- Low Voltage Protection
PARAMETERS
| Electrical parameters |
| Allowable range |
AC220V±10% or AC110V±10%, 50/60Hz±10% |
| Time measurement |
0.1ms-999999.999s |
| AC current output |
| Phase current output (effective value) |
6×0-30A or 3 × 0-60A |
| Maximum output power |
520VA/phase |
| Maximum parallel current output (effective value) |
0-180A |
| Long-term allowable working value of phase current (effective value) |
>10A |
| Allowable working time of maximum current |
>11s |
| Accuracy |
<±0.2% |
| AC voltage output |
| Phase voltage output (effective value) |
6×0-130V |
| Line voltage output (effective value) |
0-260V |
| Maximum output power |
70VA/phase |
| Accuracy |
<±0.2% |
| DC voltage output |
| Output range |
0-300V or 6×0-±130V |
| Maximum output power |
130VA |
| Accuracy |
<±0.2% |
| DC current output |
| Output range |
-10-10A or 6×0-±10A |
| Maximum output power |
150VA |
| Accuracy |
<±0.2% |
| Binary input |
| Idle contact |
1-20mA, 24V (DC) |
| Electric potential contact |
0-250V (DC) |
| Binary output |
| Idle contact |
250V/0.5A (DC) |
| Rated output |
| Frequency error |
<±0.01HzHz |
| Phase error |
<±0. 2° |
| Waveform distortion |
<±0.3% (fundamental wave) |
| Time error |
<40µs |
| Output frequency |
0-1050Hz |
| Superposed harmonic wave |
0-21times |
| Time measurement |
| Test range |
0.1ms-999999.999s |
| Mechanical parameters |
| Dimensions (L×W×H) (mm) |
360×195×365 |
| Weight (kg) |
16.6 |
| Environmental conditions |
| Use range |
0°C to 45°C |
| Storage range |
-25°C to 70°C |
PHOTO
http://guangfuhui.en.made-in-china.com
){kind=link}
){kind=link}