LZCK2502-10 Epoxy resin three phase protection 5P20 zero phase current transformer For protection device
LZCK2502-10 protection 5P20 zero phase current transformer
is suitable for current measurement and microcomputer protection of electrical equipment in 10KV and 35KV AC power system. It is widely used in compact fully insulated ring network switchgears such as ABB-Safe Ring/Safe Plus...and cable distribution boxes. The current transformer can be directly installed at the inlet andoutlet cables.The slice is imported silicon material. Thesemicircular ring core and secondary windings arevacuum poured by insulated resin.
100A
Zero Phase Current Transformer The 100A zero phase current transformer is applied to small current monitoredcircuit.
When the monitored circuit fails,
it can turn 100A input current into zero phase current ranging from 10mA to 1,
000A and control theswitching of circuits.
Zero
phase current transformer which detects the difference between the currents flowing in anumber of conductors.
The current flowing to a load must equal the current flowing back from theload.
If this is not the case,
a potentially dangerous residual current will be flowing somewhere in theinstallation.
WIRING DIAGRAMS
P1, P2 is primary polarity terminal, S1, S2 is secondary polarity terminal.
P2, S2 is homonymous terminals (subtractive polarity).
PARAMETERS
Technical parameters |
Standards |
IEC60044-1; IEC 61869-2; NTC 2205; ANSI C57.13; GB1208-2006 |
Rated primary current |
50-3000A |
Rated load |
≤30VA |
Rated frequency |
50Hz or 60Hz |
Rated secondary current |
5A or 1A |
Rated short-time thermal current |
40kA, 1S |
Rated continuous thermal current |
120%I1n |
Secondary winding power-frequency voltage |
3kV, 1min |
Instrument security factor |
FS≤10 |
Mechanical parameters |
Dimensions (W×D×H) (mm) |
φ160xφ225x100 |
Weight (kg) |
7 |
Operating conditions |
Operating temperature |
-35°C to +55°C |
Daily average temp |
<+40°C |
Storage temperature |
-40°C to +70°C |
Altitude |
<3500 meters |
Condition |
No existence of severely begrimed, erosive and radioactive gas in the air. Permission of long-term operation under rated current. |
SELECTION GUIDE
Type |
LZCK2500-10 |
LZCK2500-10 |
Purpose |
Measuring current transformer |
Protection current transformer |
Ratio |
Accuracy class and rated load(VA) |
Accuracy class and rated load(VA) |
I1/I2 |
0.5 |
1 |
3 |
10P15 |
10P10 |
10P5 |
300/5 |
5 |
5 |
5 |
2.5 |
5 |
7.5 |
400/5 |
5 |
5 |
5 |
2.5 |
5 |
7.5 |
500/5 |
5 |
7.5 |
7.5 |
5 |
7.5 |
10 |
600/5 |
5 |
7.5 |
7.5 |
5 |
7.5 |
10 |
800/5 |
10 |
10 |
10 |
5 |
10 |
15 |
1000/5 |
10 |
15 |
15 |
5 |
10 |
15 |
1200/5 |
15 |
20 |
20 |
10 |
15 |
20 |
1500/5 |
15 |
20 |
20 |
10 |
15 |
20 |
SELECTION GUIDE
Model |
Primary rated current |
Rated load |
Aperture (mm) |
Description (mm) |
Weight (kg) |
Material |
Water-proof |
LZCK-55 |
100-1500A |
≤10VA |
φ55 |
180×138×52 |
2 |
ABS+Resin |
IP65 |
LMCK185-10 |
300-3000A |
≤25VA |
φ185 |
350×283×55 |
4.5 |
ABS+Resin |
IP65 |
LZCK310-10 |
300-600A |
≤10VA |
φ50 |
φ50 x φ110 x 32 |
1 |
Resin |
silicon case (option) |
LZCK322-10 |
30-600A |
≤10VA |
φ50 |
φ50 x φ110 x 52 |
1.6 |
Resin |
silicon case (option) |
LZCK350-10 |
20-600A |
≤25VA |
φ50 |
φ50 x φ110 x 105 |
3.1 |
Resin |
silicon case (option) |
LZCK720-10 |
20-1000A |
≤25VA |
φ60 |
φ80 x φ110 x 50 |
2.1 |
Resin |
silicon case (option) |
LZCK2500-10 |
50-5000A |
≤20VA |
φ160 |
φ160 x φ225 x 100 |
7 |
Resin |
silicon case (option) |
LZCG530-10 |
30-600A |
≤20VA |
φ45 |
φ45 x φ120 x 65 |
2.1 |
Resin |
silicon case (option) |
LZCG930-10 |
100-1500A |
≤25VA |
φ60 |
φ60 x φ155 x 60 |
3.6 |
Resin |
silicon case (option) |
LZCT722-10 |
20-600A |
≤10VA |
φ82 |
φ82 x φ130 x 55 |
2.3 |
Resin |
silicon case (option) |
ORDERING INFORMATION
Be sure to the type, current ratio, accuracy class, rated load and use of the products when you plan to make a order. Special specifications could be customized.All kinds of different specifications and parameters current transformers can be made according to your needs.
PHOTOS