4mm Banana 1000/5A AC Measurement Clamp on Current Transformer

• Application: Electronic, Instrument
• Type: Current Transformer
• Phase: Single
• Operation Condition: Indoor
• Usage: Protection, Measurement
• Winding Form: Single Layer & Tightly Wound Type
• Model NO.: P50
• Insulating Medium: Common Insulating Materials
• Installation: Active Type
• Magnetic Circuit Structure: Single Stage Type
• Voltage Transformation Principle: Electromagnetic Type
• Model: 1000A Clamp on Current Transformer
• Keyword: Clamp on Current Transformer
• Ratio: 1000: 1 or 2000:1 (Customized)
• Accuracy Class: 0.1%, 0.2%, 0.5%
• Primary Current: 0 - 1000A AC
• Weight (G): 550
• Max. Jaw Opening (mm): 50
• Color: Grey
• Transport Package: Standard Export Wooden Box
• Specification: 102.9 x 219.6 x 28
• Trademark: GFUVE
• Origin: Beijing, China
• Production Capacity: 10000pieces/Month

Product Description

P50 4mm banana 1000/5A AC Measurement Clamp on Current Transformer

The round jaw design on the P50 Series AC current transformer along with the high content nickel metal core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important. Measurement range is 1mA to 1200A.
The P50 is a general purpose 1000A AC current probe designed for use with DMMs, loggers and other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The P50 has an integral 2.5m lead terminated. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy 0.1% and low phase shift and wide frequency response are important.
Clamp-On Current Transformers are the one-handed operating solution for temporary energy audits orlong-term energy studies. The GFUVE 1000A "P50" Clamp is specifically designed to offer broad utility in acompact shape. These CTs deliver high-accuracy, high-sensitivity, versatility, and low phase shift.

Applications
Power quality measuring
Large industrial loads
Measuring around cable bundles
Power load monitoring
Waveform analysis
Energy meter calibrator
Features
Measurement range of 1mA to 1200A AC
Large jaw opening accommodates conductors up to two 500kcmil
Improved ergonomic design and easy operation
High content nickel metal core
Conforms to EN 61010, 600V CAT III
Low phase shift for power measurement
Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters
UL, CE mark
Parameters

Electrical parameters
Ratio		1000: 1 or 2000:1 (customized)
Accuracy class		0.1%, 0.2%, 0.5%
Primary current		0 - 1000A AC
Secondary current		1mV/A AC, 5mV/A or (customized)
Max. Cont. Input current		1200A
Over voltage category		CAT III 600V
Output signal (AC current)		333mV, 500mV,1V,2V,5V AC at nominal input current
AC Accuracy(1000A Range)
0-10A		≤0.5%
10-100		≤0.2%
10-1200A		≤0.1%
AC Phase Shift(1000A Range)
0-10A		≤0.5°
10-100		≤0.2°
10-1200A		≤0.1°
Frequency range		40Hz-2000Hz
Dielectric strength		3KV 50Hz/60Hz at 1 minute
Temperature range		-20°C to +55°C
Output		2.5 meter cable with D01 connector
Max. voltage not insulated conductors		600 V
Standard		EN 61010-1, EN 61010-2-032, IEC60044-1
Installation		Clamp type
Output mode		Lead output (2.5m)
Mechanical parameters
Dimensions (L x W x H)(mm)		102.9 x 219.6 x 28
Weight (g)		550
Holding wire diameter (mm)		φ50
Max. jaw opening (mm)		50
Color		Gray or blue
Material		PC+ABS+Polycarbonate, UL94 V0

Selection MODEL

Model	Rate Current	Max Current	Secondary Voltage	Coil Ratio	Burden Resistance	Accuracy
P50V1-1000	1000A	1200A	1V	1000:1	customized	0.1%
P50V2-1000	1000A	1200A	2V	1000:1	customized	0.1%
P50V4-1000	1000A	1200A	4V	1000:1	customized	0.1%
P50V5-1000	1000A	1200A	5V	1000:1	customized	0.1%
P50V10-1000	1000A	1200A	10V	1000:1	customized	0.1%
P50V1-500	500A	600A	1V	1000:1	customized	0.2%
P50V2-500	500A	600A	2V	1000:1	customized	0.2%
P50V4-500	500A	600A	4V	1000:1	customized	0.2%
P50V5-500	500A	600A	5V	1000:1	customized	0.2%
P50V10-500	500A	600A	10V	1000:1	customized	0.2%

Photo