Q125 2000A High accuracy bus bar ac clamp on current transformer
The model Q125 2000A High accuracy bus bar ac clamp on current transformer measuring instrument can be used for a current vector for the copper bar or the power aluminum bus bar on-line detection.
Applications
1. Electric energy meter calibrator (on site)
2. Double clamp type ground resistance tester
3. Double clamp type phase volt-ampere meter
4. Digital multi-meter
5. Multi-function energy meter
6. Oscilloscope
7. Power quality analyzer
8. Matched instruments
9. Calibration instrument on site
Features
1. Measurement range of 1mA to 3000A AC
2. Small, compact size; holding wire diameter 120mm×50mm
3. Improved ergonomic design and easy operation
4. Low phase shift for power measurement
5. With load capacity ≤4Ω; When 1A output, it is 0.1Ω; When 5A output, it is 2.5VA.
6. Output model: Lead output(2.5m)
Parameters
Electrical parameters |
|
Ratio |
1000: 1 or 2000:1 (customized) |
Accuracy class |
0.2%, 0.5%, 1% |
Primary current |
0 - 3000A AC |
Secondary current |
0 - 5A AC (customized) |
Max. Cont. Input current |
3600A |
Over voltage category |
CAT III 600 V |
Frequency range |
40Hz-2000Hz |
Dielectric strength |
3KV 50Hz/60Hz at 1 minute |
Temperature range |
-20°C to +55°C |
Output |
2.5 meter cable with D01 connector |
Max. voltage not insulated conductors |
600 V |
Standard |
EN 61010-1, EN 61010-2-032, IEC60044-1 |
Installation |
Clamp type |
Output mode |
Lead output (2.5m) |
Mechanical parameters |
|
Dimensions (L x W x H) (mm) |
116 x 327 x 35 |
Weight (g) |
1200 |
Holding wire diameter (mm) |
φ120 x 50 |
Max. jaw opening (mm) |
50 |
Jaw color |
White |
Material |
PC+ABS+Polycarbonate, UL94 V0 |