1000A AC Clamp on CT Current Transformer 0.1% Current Measurement

• Application: Electronic, Instrument
• Type: Current Transformer
• Phase: Single
• Operation Condition: Outdoor
• Usage: Measurement
• Winding Form: Single Layer & Tightly Wound Type
• Model NO.: Q50A
• Insulating Medium: Common Insulating Materials
• Installation: Active Type
• Magnetic Circuit Structure: Single Stage Type
• Voltage Transformation Principle: Electromagnetic Type
• Model: 1000A Clamp on Current Transformer
• Keyword: Clamp on Current Transformer
• Ratio: 1000: 1 or 2000:1 (Customized)
• Applications: Power Meter
• Accuracy Class: 0.1%, 0.2%, 0.5%
• Primary Current: 0 - 1000A AC
• Secondary Current: 0 - 5A AC (Customized)
• Weight (G): 550
• Max. Cont. Input Current: 1200A
• Color: Blue and Grey
• Transport Package: Standard Carton Packaging
• Specification: 102.9 x 219.6 x 28
• Trademark: GFUVE
• Origin: Beijing, China
• Production Capacity: 1000PCS/Month

Product Description

Q50A 1000A RATIO CUSTOMISED AC CLAMP ON CT CURRENT TRANSFORMER

The round jaw design on the P50 Series clamp-on current probes along with the high-content nickel metal core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important. The measurement range is 1mA to 1200A.
The P50 clamp current transformer is a general-purpose 1000A AC probe designed for use with DMMs, loggers, and other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The P50 clamp current probe has an integral 2.5m lead terminated. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy of 0.1% and low phase shift and wide frequency response are important.

FEATURES

UL, CE mark;

Holding wire diameter: φ18mm;

Frequency 10Hz-2MHz Bandwidth;

High times harmonic measurement;
Conforms to EN 61010, 600V CAT III;

Measurement range of 1mA to 200A AC;

Low phase shift for power measurement;

High-content nickel metal permalloy core;

Improved ergonomic design & easy operation;

High precision 0.1% for current measurement;

Designed for DMMs, recorders, loggers, oscilloscopes, power, and harmonic meters;

PARAMETERS

Ratio	1000: 1 or 2000:1 (customized)
Accuracy class	0.1%, 0.2%, 0.5%
Primary current	0 - 1000A AC
Secondary current	0 - 5A AC (customized)
Max. Cont. Input current	1200A
Overvoltage category	CAT III 600V
Output signal	500mA,1A,5A  AC at nominal input current
Frequency range	40Hz-2000Hz
Dielectric strength	3KV 50Hz/60Hz  at 1 minute
Temperature range	-20°C to +55°C
Output	2.5-meter cable with D01 connector
Max. voltage not insulated conductors	600 V
Standard	EN 61010-1, EN 61010-2-032, IEC60044-1
Installation	Clamp type
Output mode	Lead output(2.5m)
Weight (g)	550
Holding wire diameter (mm)	φ50
Max. jaw opening (mm)	50
Jaw Color	Blue
Material	PC+ABS+Polycarbonate, UL94 V0