P50 500A High Accuracy AC Clamp on Current Sensor 5A
Product Description
The round jaw design on the P50 Series clamp on current sensor along with the high content nickel metal core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important. Measurement range is 1mA to 1200A.
The P50 clamp current sensor is a general purpose 1000A AC current probe designed for use with DMMs, loggers and other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The P50 clamp current probe has an integral 2.5m lead terminated. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy 0.1% and low phase shift and wide frequency response are important.
Clamp on Type ac Current sensor Universal Current Transformer Clamp on Current Transformer belongs to high performance transformer field. It is a high accuracy AC current transformer which can measure and analyze a variety of electric parameter without power outage, and the difficult part in technology development is that the high quality magnetic core requests open freely.
Characteristic and application
Suitable for 1000 A cable online measurement.
Lolding wire diameter: Φ 50mm
Dimension: 101mm× 219mm× 26mm
Load capacity: MA output≤ 4Ω , 1A output 0.1Ω , 5A output 2.5VA
Installation: Clamp type
Output mode: Lead output
Primary current |
Secondary current |
Precision |
| 10A |
2.5mA |
Class 0.1%, 0.2%, 0.5% |
| 10A |
5mA |
Class 0.1%, 0.2%, 0.5% |
| 20A |
5mA |
Class 0.1%, 0.2%, 0.5% |
| 100A |
20mA |
Class 0.1%, 0.2%, 0.5% |
| 100A |
40mA |
Class 0.1%, 0.2%, 0.5% |
| 100A |
50mA |
Class 0.1%, 0.2%, 0.5% |
| 100A |
100mA |
Class 0.1%, 0.2%, 0.5% |
| 200A |
80mA |
Class 0.1%, 0.2%, 0.5% |
| 200A |
100mA |
Class 0.1%, 0.2%, 0.5% |
| 200A |
200mA |
Class 0.1%, 0.2%, 0.5% |
| 300A |
120mA |
Class 0.1%, 0.2%, 0.5% |
| 300A |
150mA |
Class 0.1%, 0.2%, 0.5% |
| 300A |
200mA |
Class 0.1%, 0.2%, 0.5% |
| 300A |
300mA |
Class 0.1%, 0.2%, 0.5% |
| 500A |
100mA |
Class 0.1%, 0.2%, 0.5% |
| 500A |
200mA |
Class 0.1%, 0.2%, 0.5% |
|
| 500A |
250mA |
Class 0.1%, 0.2%, 0.5% |
|
| 500A |
500mA |
Class 0.1%, 0.2%, 0.5% |
|
| Primary current |
Secondary current |
Precision |
|
| 600A |
120mA |
Class 0.1%, 0.2%, 0.5% |
|
| 600A |
200mA |
Class 0.1%, 0.2%, 0.5% |
|
| 600A |
300mA |
Class 0.1%, 0.2%, 0.5% |
|
| 600A |
400mA |
Class 0.1%, 0.2%, 0.5% |
|
| 600A |
500mA |
Class 0.1%, 0.2%, 0.5% |
|
| 600A |
600mA |
Class 0.1%, 0.2%, 0.5% |
|
| 700A |
200mA |
Class 0.1%, 0.2%, 0.5% |
|
| 700A |
350mA |
Class 0.1%, 0.2%, 0.5% |
|
| 700A |
700mA |
Class 0.1%, 0.2%, 0.5% |
|
| 800A |
160mA |
Class 0.1%, 0.2%, 0.5% |
|
| 800A |
200mA |
Class 0.1%, 0.2%, 0.5% |
|
| 800A |
250mA |
Class 0.1%, 0.2%, 0.5% |
|
| 800A |
320mA |
Class 0.1%, 0.2%, 0.5% |
|
| 800A |
400mA |
Class 0.1%, 0.2%, 0.5% |
|
| 800A |
500mA |
Class 0.1%, 0.2%, 0.5% |
|
| 800A |
800mA |
Class 0.1%, 0.2%, 0.5% |
|
| 500A ~ 1000A |
1A |
Class 0.2%, 0.5% |
|
| 600A ~ 1000A |
1A |
Class 0.1%, 0.2%, 0.5% |
|
| 200A |
5A |
Class 1% |
|
| 300A ~ 500A |
5A |
Class 0.5% |
|
| 500A ~ 1000A |
5A |
Class 0.2%, 0.5% |
|
| Grounding resistance tester supporting |
Need to match special instrument |
Class 0.1%, 0.5% |
| Ratio |
1000: 1 or 2000:1 , customized |
| Nominal input current |
1000 A |
| Max. Cont. Input current |
1200A |
| Accuracy |
0.1 % , 0.2% , 0.5% |
| Over voltage category |
CAT III 600 V |
| Output signal |
500mA,1A,5A AC at nominal input current |
| Frequency range |
40 Hz-2000 Hz |
| Dielectric strength |
3KV 50Hz/60Hz at 1 minute |
| Temperature range |
-20 °C to +55 °C |
| Output |
2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors |
600 V |
| Max. jaw opening |
50 mm |
| Standard |
EN 61010-1 |
| Dimensions |
101mm x 219mm x 26mm |
| Weight |
650 g |
Audited Supplier 
){kind=link}
){kind=link}