XQ20 HIGH PRECISION 200A CLASS 0.1 AC MINI SPLIT CORE AC CURRENT CLAMP ON CTS
The model XQ20 openable jaw AC current clamp on cts are best-in-class devices for use with power meters, power analyzers and high performance oscilloscopes.
The XQ20
Series AC current clamp on cts
are high performance models, and use a custom nickel core to improve accuracy and phase shift on the low end of the measurement range. The XQ20 Series current clamp on cts
is an excellent probe to be used in power and low level current measurement applications.
APPLICATIONS
- Power quality measuring
- Large industrial loads
- Measuring around cable bundles
- Power load monitoring
- Waveform analysis
- Energy meter calibrator
FEATURES
- Suitable for 0A-200A cable online measurement.
- Holding wire diameter: φ20mm
- Dimension: 52.5mm×137.5mm×28mm
- Load capacity: ≤4Ω
- Installation: clamp type
- Output mode: lead output
PARAMETERS
Electrical parameters |
Ratio |
1000: 1 or 2000:1 (customized) |
Accuracy class |
0.1%, 0.2% |
Primary current |
0 - 200A AC |
Secondary current |
0 - 200mA AC (customized) |
Max. Cont. Input current |
240A |
Load capacity |
≤4Ω |
Over voltage category |
CAT III 600V |
Output signal (AC current) |
From 0 to 200mA AC at nominal input current |
Electrical parameters - continued |
|
Output signal (AC voltage) |
From 0 to 2V AC at nominal input current |
Frequency range |
40Hz-2000Hz |
Dielectric strength |
3KV 50Hz/60Hz at 1minute |
Temperature range |
-20°C to +55°C |
Output |
2.5 meter cable with D01 connector |
Max. voltage not insulated conductors |
600 V |
Standard |
EN 61010-1, EN 61010-2-032, IEC60044-1 |
Installation |
clamp type |
Output mode |
lead output(2.5m) |
Mechanical parameters |
Dimensions (L x W x H) (mm) |
52.5 x 137.5 x 28 |
Weight (g) |
400 |
Holding wire diameter (mm) |
φ20 |
Max. jaw opening (mm) |
20 |
Jaw color |
Red, yellow, blue, green, black |
Material |
PC+ABS+Polycarbonate, UL94 V0 |
http://guangfuhui.en.made-in-china.com