XQ20 HIGH PRECISION 200A AC MINI CLAMP ON SPLIT CORE CURRENT SENSOR
The model XQ20 clamp on current sensor is suitable for 200A cable online measurement, the user friendly shape make It easily clamp onto cables or bus bars.
FEATURES
- Suitable for 10A-200A cable online measurement.
- Holding wire diameter: φ20mm
- Dimension: 52.5mm×137.5mm×28mm
- Load capacity: ≤4Ω
- Installation: clamp type
- Output mode: lead output
PARAMETERS
| Electrical parameters |
| Ratio |
1000: 1 or 2000:1 (customized) |
| Accuracy class |
0.1%, 0.2% |
| Primary current |
0 - 200A AC |
| Secondary current |
0 - 200mA AC (customized) |
| Max. Cont. Input current |
240A |
| Load capacity |
≤4Ω |
| Over voltage category |
CAT III 600V |
| Output signal (AC current) |
From 0 to 200mA AC at nominal input current |
| Output signal (AC voltage) |
From 0 to 2V AC at nominal input current |
| Frequency range |
40Hz-2000Hz |
| Dielectric strength |
3KV 50Hz/60Hz at 1minute |
| Temperature range |
-20°C to +55°C |
| Output |
2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors |
600 V |
| Standard |
EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation |
Clamp type |
| Output mode |
Lead output(2.5m) |
| Mechanical parameters |
| Dimensions (L x W x H) (mm) |
52.5 x 137.5 x 28 |
| Weight (g) |
400 |
| Holding wire diameter (mm) |
φ20 |
| Max. jaw opening (mm) |
20 |
| Jaw color |
Red, yellow, blue, green, black |
| Material |
PC+ABS+Polycarbonate, UL94 V0 |
Audited Supplier 
){kind=link}
){kind=link}