Q40 Selection 500A 0-5V Good Linarity Clamp On Current Sensor
The Q40 Series AC Current Probes are high performance models, and use a custom nickel core to improve accuracy and phase shift on the low end of the measurement range. The Q40 Series is an excellent probe to be used in power and low level current measurement applications.
Applications
Power quality measuring
Large industrial loads
Measuring around cable bundles
Power load monitoring
Waveform analysis
Energy meter calibrator
Features
Measurement range of 1mA to 600A AC
Large jaw opening designed
Improved ergonomic design and easy operation
High content nickel metal core
Conforms to EN 61010, 600V CAT III
Low phase shift for power measurement
Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters
UL, CE mark
Parameters
| Electrical parameters |
|
| Ratio |
1000: 1 or 2000:1 (customized) |
| Accuracy class |
0.1%, 0.2%, 0.5% |
| Primary current |
0 - 500A AC |
| Secondary current |
0 - 1A AC or 0-5V AC (customized) |
| Max. Cont. Input current |
600A |
| Over voltage category |
CAT III 600V |
| Frequency range |
40Hz-2000Hz |
| Dielectric strength |
3KV 50Hz/60Hz at 1 minute |
| Temperature range |
-20°C to +55°C |
| Output |
2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors |
600 V |
| Standard |
EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation |
Clamp type |
| Output mode |
Lead output (2.5m) |
| Mechanical parameters |
|
| Weight (g) |
500 |
| Holding wire diameter (mm) |
φ40 |
| Max. jaw opening (mm) |
40 |
| Color |
Black |
| Material |
PC+ABS+Polycarbonate, UL94 V0 |
Audited Supplier 
){kind=link}
){kind=link}