Q125 2000a Busbar Slit Core AC Clamp on Current transformer 5a
The model Q125 High Accuracy slit core AC busbar clamp on current transformer can be used for a current vector for the copper bar or the power aluminum bus bar on-line detection.
Electrical measuring and testing equipment Current transformer clamp on type current probe clamp on current transformer current transformer, fast delivery and favorable price
Characteristic and application: AC Current probes Can be used for a current vector for the copper bar or the power LvPai on-line detection.
But holding wire diameter: 120mm*50mm
Dimension: 116mm× 327mm× 35mm
(View outline drawing)
With load capacity: Ma OUTPUT ≤ 4Ω ,
1A OUTPUT 0.1Ω , 5A OUTPUT 2.5VA
Installation: Clamp type
Output mode: Lead output
Primary current |
Secondary current |
Precision |
180A ~ 1000A |
30mA |
Class 0.5% |
1000A ~ 2000A |
250mA |
Class 0.1%, 0.2%, 0.5% |
1000A ~ 3000A |
500mA |
Class 0.1%, 0.2%, 0.5% |
300A ~ 1000A |
1A |
Class 0.2%, 0.5% |
1000A ~ 3000A |
1A |
Class 0.1%, 0.2%, 0.5% |
300A ~ 1000A |
5A |
Class 0.5% |
1000A ~ 3000A |
5A |
Class 0.2%, 0.5% |
Electrical parameters |
Ratio |
1000: 1 or 2000:1 (customized) |
Accuracy class |
0.2%, 0.5% |
Primary current |
0 - 3000A AC |
Secondary current |
0 - 5A AC (customized) |
Max. Cont. Input current |
3600A |
Over voltage category |
CAT III 600 V |
Output signal |
500mA,1A,5A AC at nominal input current |
Frequency range |
40Hz-2000Hz |
Dielectric strength |
3KV 50Hz/60Hz at 1 minute |
Temperature range |
-20°C to +55°C |
Output |
2.5 meter cable with D01 connector |
Max. voltage not insulated conductors |
600 V |
Standard |
EN 61010-1, EN 61010-2-032 |
Installation |
clamp type |
Output mode |
lead output(2.5m) |
Mechanical parameters |
Dimensions (L x W x H) (mm) |
116 x 327 x 35 |
Weight (g) |
1200 |
Holding wire diameter (mm) |
φ120 x 50 |
Max. jaw opening (mm) |
50 |