Q50A GFUVE 1000A/1A High Accuracy Class ac Clamp on Cts
The model Q50A 1000A/1A High Accuracy Class ac Clamp on Cts are best-in-class devices for use with power meters, power analyzers and high performance oscilloscopes.
The model Q50A current probe is designed for fast and easy measure the current in industrial and power environment, it has wide range of current measurement from 1mA to 1000A, High precision 0.1%, easy operation for measurement instruments. Meet EN61010-2-032 standard. The Q50A AC current clamp are designed to extend the current measuring capabilities of DMMs or BNC, power instruments, oscilloscopes, hand-held scopes, recorders or loggers, clamp type grounding resistance tester, double clamp phase angle meter, energy meter calibrator and other diverse instruments.
Applications
Power quality measuring
Large industrial loads
HVAC
Measuring around cable bundles
Power load monitoring
Waveform analysis
Features
Measurement range of 1mA to 1000A AC
Small, compact size
Improved ergonomic design and easy operation
Conforms to EN 61010, 600V CAT III
Low phase shift for power measurement
Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters
With load capacity≤ 4, When 1A output, it is 0.1; When 5A output, it is 2.5VA.
Output model: Lead output(2.5m)
Ratio |
1000: 1 or 2000:1 , customized |
Nominal input current |
1000 A |
Max. Cont. Input current |
1200A |
Accuracy |
0.1 %,0.2%,0.5% |
Over voltage category |
CAT III 600 V |
Output signal |
1A AC at nominal input current |
Frequency range |
40 Hz....2000 Hz |
Dielectric strength |
3KV 50Hz/60Hz at 1 minute |
Temperature range |
-20 °C...+55 °C |
Output |
2.5 meter cable with D01 connector |
Max. voltage not insulated conductors |
600 V |
Max. jaw opening |
50 mm |
Standard |
EN 61010-1 |
Dimensions |
94mm x 210mm x 22mm |
Weight |
600 g |