STS is an escrow service that protects both buyers and suppliers. Funds are held securely by Made-in-China.com until order terms (e.g., delivery, quality) are fulfilled
| Customization: | Available |
|---|---|
| Type: | Electromagnetic |
| Output Signal Type: | Analog Output |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
Payment Guarantee
Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Inspection Service
After-Sales & Dispute Handling
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The Q125B current sensor clamp is a high performance AC Current clamp with excellent transformation and low phase shift. The high quality magnetic core and uniform windings provide for accurate measurements up to 1000A AC/2000A AC/3000A AC. The Round jaw permits 125mm cable positionings. Provide excellent TRMS capabilities and reliable signal reproduction. It is widely applied in electricity, communication, meteorology, railway, oilfield, construction, measurement, scientific and research teaching unit, industrial and mining enterprises. EN 61010-1, EN 61010-2-032, IEC61869-2 Standard.
HVAC;
Power meter;
Oscilloscopes;
Electrical utility;
Cable fault tester;
Digital multi-meter;
Plant maintenance;
Electrical Laboratory;
Large industrial loads;
Power load monitoring;
Power quality analyzer;
Data logging/recording;
Industrial maintenance;
Power quality monitoring;
Power and harmonic meters;
Calibration instrument on site;
Measuring around cable bundles;
UL, CE CNAS mark;
High content permalloy core;
Large jaw opening designed;
Holding wire diameter: φ125mm;
Frequency 40Hz-2000Hz Bandwidth;
Conforms to EN 61010, 600V CAT III;
Measurement range of 1A to 3600A AC;
Low phase shift for power measurement;
Industrial design & beautiful appearance;
Transformation ratio: 1000:5, 2000:5, 3000:5;
Improved ergonomic design & easy operation;
High precision 0.2% for current measurement;
Output:5mA AC/A AC, 2.5mA AC/A AC, 1.666mA AC/A AC;
Nominal range: 1 to 1000A AC, 1 to 2000A AC, 1 to 3000A AC
Designed for recorders, loggers, oscilloscopes, power and harmonic meters;
| Electrical parameters | |
|---|---|
| Ratio | 1000: 1 or 2000:1 (customized) |
| Accuracy class | 0.2%, 0.5%, 1% |
| Primary current | 0 - 3000A AC |
| Secondary current | 0 - 5A AC (customized) |
| Max. Cont. Input current | 3600A |
| Over voltage category | CAT III 600V |
| Output signal (AC current) | 500mA,1A,2A,5A AC at nominal input current |
| Output signal (AC voltage) | 333mV, 500mV, 1V, 5V AC at nominal input current |
| Frequency range | 40Hz-20KHz |
| Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 720 V |
| Standard | EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 600V CAT III |
| Installation | Clamp type |
| Output mode | Lead output (2.5m) |
| Connector | BNC, 4mm banana, signal cable(2 cores),customized |
| Mechanical parameters | |
| Dimensions (L x W x H) (mm) | 180 x 319 x 35 |
| Weight (g) | 1100 |
| Holding wire diameter (mm) | φ125 |
| Max. jaw opening (mm) | 125 |
| Jaw color | Black |
| Material | PC+ABS, UL94 V0 |
){kind=link}