Q13 High quality AC 100A Electronically compensated clip-on CT
The model Q13 electronically compensated clip-on CT's has been designed for the measurements of currents in the range of 10 mA up to 100 A. Their small size makes them particularly handy when working in cramped spaces such as meter installations or circuit breaker boards.
FEATURES
Suitable for 10A-100A cable online measurement.
Holding wire diameter: φ13mm
Dimension: 52.5mm×136.5mm×28mm
Load capacity: ≤4Ω
Installation: clamp type
Output mode: lead output
PARAMETERS
Electrical parametersMechanical parameters
Ratio |
1000: 1 or 2000:1 (customized) |
Accuracy class |
0.1%, 0.2% |
Primary current |
0 - 100A AC |
Secondary current |
0 - 100mA AC (customized) |
Max. Cont. Input current |
120A |
Over voltage category |
CAT III 600V |
Output signal |
100mA AC at nominal input current |
Frequency range |
40Hz-2000Hz |
Dielectric strength |
3KV 50Hz/60Hz at 1 minute |
Temperature range |
-20°C to +55°C |
Output |
2.5 meter cable with D01 connector |
Max. voltage not insulated conductors |
600 V |
Standard |
EN 61010-1, EN 61010-2-032 |
Installation |
clamp type |
Output mode |
lead output(2.5m) |
Dimensions (L x W x H) (mm) |
48 x 179 x 27 |
Weight (g) |
300 |
Holding wire diameter (mm) |
φ13 |
Max. jaw opening (mm) |
13 |