Q13 Current Transformer Clip on 13mm Hole 100A/50mA
The Q13 is a high accuracy mini current transformer for measurements to 120A AC. This clip on current transformer uses a special magnetic core to provide higher accuracy and lower phase shift. The Q13 Series is an excellent current transformer to be used in power and low level current measurement applications.
APPLICATIONS
- Power quality measuring
- Measuring around cable bundles
- Power load monitoring
- Waveform analysis
- Energy meter calibrator
- Measuring in breaker panels
- HVAC
- Residential and commercial sites
- Data logging/recording
FEATURES
- Measurement range of 1mA to 120A AC
- Improved ergonomic design and easy operation
- High content nickel metal core
- Low phase shift for power measurement
- Small, compact size
- Jaw opening accommodates conductors up to 13mm diameter
- Designed for DMMs, loggers, recorders and oscilloscopes
- 40Hz to 10kHz response
- 1mA/A AC output signals
- Designed to EN 61010, 600V CAT III safety standard
- UL, CE mark
PARAMETERS
Electrical parameters |
Ratio |
1000: 1 or 2000:1 (customized) |
Accuracy class |
0.1%, 0.2% |
Primary current |
0 - 100A AC |
Secondary current |
0 - 100mA AC (customized) |
Max. Cont. Input current |
120A |
Over voltage category |
CAT III 600V |
Output signal (AC current) |
100mA AC at nominal input current |
Output signal (AC voltage) |
100mV,1V AC at nominal input current |
Frequency range |
40Hz-2000Hz |
Dielectric strength |
3KV 50Hz/60Hz at 1 minute |
Temperature range |
-20°C to +55°C |
Output |
2.5 meter cable with D01 connector |
Max. voltage not insulated conductors |
600 V |
Standard |
EN 61010-1, EN 61010-2-032, IEC60044-1 |
Installation |
Clamp type |
Output mode |
Lead output (2.5m) |
Mechanical parameters |
Dimensions (L x W x H)(mm) |
45 x 160 x 25(2.5m) |
Weight (g) |
300 |
Holding wire diameter (mm) |
φ13 |
Max. jaw opening (mm) |
13 |
Color |
Black |
Material |
PC+ABS+Polycarbonate, UL94 V0 |