P50 Gfuve High Precision Current Clamp-on CT 500A for Pqa

• Customization: Available
• Application: Instrument
• Type: Current Transformer
• Model NO.: P50
• Operation Condition: Outdoor
• Usage: Measurement
• Winding Form: Single Layer & Tightly Wound Type
• Insulating Medium: Insulating Paper
• Installation: Active Type
• Magnetic Circuit Structure: Combined Type
• Voltage Transformation Principle: Electromagnetic Type
• Ratio: 1000:1
• Current Range: 0-500A
• Output Signal: 0-500mA
• Weight: 550g
• Color: Grey
• P50: Current Clamp on CT 500A
• Diameter: 50mm
• Phase Shift: 0.1%
• Usages: 3 Phase Power Quality Analyzer
• Standard: En 61010-1, En 61010-2-032, IEC60044-1
• Transport Package: Standard Export Wooden Box
• Specification: P50, 500a/500ma, 0.1%
• Trademark: GFUVE
• Origin: Beijing China
• Production Capacity: 10000PCS/Month

Product Description

P50 GFUVE manufacturer made in China high precision current clamp on ct 500a for three-phase power quality analyzer

The round jaw design on the P50 Series AC clamp on ct 500a along with the high content nickel metal core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important. The measurement range is 1mA to 600A.
The P50 is a general-purpose 500A AC clamp on ct designed for use with DMMs, loggers, and other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mA per amp measured in the jaw. The P50 has an integral 2.5m lead terminated. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy of 0.1% and low phase shift and wide frequency response are important.




FEATURES

UL, CE mark;

Holding wire diameter: φ18mm;

Frequency 10Hz-2MHz Bandwidth;

High times harmonic measurement;

Conforms to EN 61010, 600V CAT III;

Measurement range of 1mA to 200A AC;

Low phase shift for power measurement;

High-content nickel metal permalloy core;

Improved ergonomic design & easy operation;

High precision 0.1% for current measurement;

Designed for DMMs, recorders, loggers, oscilloscopes, power, and harmonic meters;

PARAMETERS

Electrical parameters
Ratio		1000: 1 or 2000:1 (customized)
Accuracy class		0.1%, 0.2%, 0.5%
Primary current		0 - 600A AC
Secondary current		1mA/A AC, 1mV/A, or (customized)
Max. Cont. Input current		1200A
Overvoltage category		CAT III 600V
Output signal (AC current)		333mV, 500mV,1V,2V,5V AC at nominal input current
AC Accuracy(1000A Range)
0-10A		≤0.5%
10-100		≤0.2%
10-1200A		≤0.1%
AC Phase Shift(1000A Range)
0-10A		≤0.5°
10-100		≤0.2°
10-1200A		≤0.1°
Frequency range		40Hz-2000Hz
Dielectric strength		3KV 50Hz/60Hz at 1 minute
Temperature range		-20°C to +55°C
Output		2.5-meter cable with D01 connector
Max. voltage not insulated conductors		600 V
Standard		EN 61010-1, EN 61010-2-032, IEC60044-1
Installation		Clamp type
Output mode		Lead output (2.5m)
Mechanical parameters
Dimensions (L x W x H)(mm)		102.9 x 219.6 x 28
Weight (g)		550
Holding wire diameter (mm)		φ50
Max. jaw opening (mm)		50
Color		Gray or blue
Material		PC+ABS+Polycarbonate, UL94 V0