Q50A AC Current Probe for Power System Current Signal Acquisition

• Customization: Available
• After-sales Service: 24 Hours Service
• Warranty: 24 Hours Service
• Model NO.: Q50A
• Max. Jaw Opening (mm): 50
• Jaw Color: Blue or Grey
• Accuracy Class: 0.1%, 0.2%, 0.5%
• Ratio: 1000:1, 2000:1 (Customized)
• Transport Package: Wooden Box
• Specification: 102.9 x 219.6 x 28
• Trademark: GFUVE
• Origin: Beijing

Product Description

Q50A 1000A/1A WIDE RANGE MEASURING AC CURRENT PROBE

The model Q8A1 current probe/clamp on ct is based on AC transformer technology for use in measurement of AC current, it is suitable for 5A, 10A cable online measurement. With measurement range of 1 mA to 10A AC and frequency range from 40Hz to 200KHz, it has a high accuracy class of 0.1%. It suits for oscilloscope, power quality analyzer, electric energy meter calibrator. Easy to operate everywhere. its technical standard according to EN 61010-1, EN 61010-2-032, IEC60044-1. This model Q8A1 clamp on current probe have been used in many instrument manufacturers.

* UL, CE CNAS mark;

* High content permalloy core;

* Holding wire diameter: φ8mm;

* Frequency 10Hz-2MHz bandwidth;

* Conforms to EN 61010-2-032, 600V CAT III;

* Measurement range of 1mA to 12A AC;

* Low phase shift for power measurement;

* Industrial design & beautiful appearance;

* Improved ergonomic design & easy operation;

* High precision 0.1% for current measurement;

* Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters;

*2-128th harmonic measurement;

* Power meter;

* Phase angle meter;

* Energy sub-meters;

* Cable fault analysis;

* Power load monitoring;

* Large industrial loads;

* Data logging/recording;

* Energy meter calibrator;

* Earth resistance meter;

* Power quality monitoring;

* power and harmonic meters;

* Power quality analyzer (PQA);

* CT secondary current detection;

* Measuring around cable bundles;

* Waveform analysis (oscilloscopes meter);

Electrical parameters
Ratio	1000: 1, 2000:1 or 2500:1 (customized)
Accuracy class	0.1 %,0.2%
Primary current	0 - 5A AC, 0 - 10A AC, 0 - 20A AC
Secondary current	0 - 2.5mA, 0-5mA, 0-10mA, 0-20mA AC (customized)
Secondary voltage	0 - 50mV, 0-100mV, 0-200mV, 0-1V, 0-5V AC (customized)
Max. Cont. Input current	24A
Load capacity	≤20Ω , Standard 4Ω
Over voltage category	CAT III 600V
Output signal (AC current)	From 0 to 10mA AC at nominal input current
Output signal (AC voltage)	From 0 to 100mV AC at nominal input current
Signal ratio	1mA/A, 1mV/A, 10mV/A, 100mV/A
Frequency range	10Hz-200KHz
Dielectric strength	3KV 50Hz/60Hz at 1minute
Temperature range	-20°C to +55°C
Output	2.5 meter cable with D01 connector
Max. voltage not insulated conductors	720 V
Standard	EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 600V CAT III
Installation	Clamp type
Output mode	Lead output (2.5m)
Connector	BNC, 4mm banana, Audio plug,customized
Dimensions (L x W x H) (mm)	42.6x122.5x23
Weight (g)	250
Holding wire diameter (mm)	φ8
Max. jaw opening (mm)	8
Jaw color	Black
Material	PC+ABS+Polycarbonate, UL94 V0
Dimensions (L x W x H)(mm)	105 x 218 x 30
Weight (g)	650
Holding wire diameter (mm)	φ52
Max. jaw opening (mm)	52
Jaw color	Red & grey
Material	PC+ABS, UL94 V0

Company Profile