High Voltage Current Collecting Device for Wireless Ammeter Recorder

• Customization: Available
• After-sales Service: 24 Hour Service
• Warranty: 2 Years
• Model NO.: GF2018
• Communication Distance(Wireless): Max 100m
• Communication: 433m, 868m or 915m (Option)
• Software Requirements: PC-Linksoftware & Microsoft Excel
• Processor: 100 MHz or Higher (200 MHz or Higher Recommended)
• RAM: 32 MB, 64m Recommended
• Drive Space: 15 MB to Load Software, 10 MB of Operating Space
• Use of Position: Outdoor or Indoor
• Voltage: 69kv,35kv,20kv, 10kv, 6kv
• Current: 1 to 300A/1 to 600A/1 to 1000A/1 to 2000A
• AMPS Accuracy: 1% Rd
• Transport Package: Standard Package
• Specification: High voltage current collecting device for wirel
• Trademark: GFUVE
• Origin: China
• Production Capacity: 50000 Pieces/Mes
• Package Size: 55.00cm * 40.00cm * 30.00cm
• Package Gross Weight: 1.000kg

Product Description

GF2018 High voltage current collecting device for wireless ammeter recorder

Product Description

 

1.  Collect and analyze load profiles
2.  Easily clamps to the line in a few seconds
3.  Check for load balance
4.  Patented open CT sensor with ±1% accuracy
5.  433M communication with no annoying cables to connect
6.  Recorded data quickly downloads into the user's PC
7.  PC-Link Software interface downloads directly into  Microsoft Excel
8.  Generate reports and create graphs for profile analysis
 

Features

 

                 
1.  The Primary current sensor uses the same sensor technology as the original Rogowski coil. The True RMS inductive      sensor does not use magnetic materials. The opening of the sensor is electronically closed and external currents are electronically rejected.
2.  The accuracy, external current reject, and range of currents measured by the patented amp sensor substantially exceed the performance of the best clamp-on sensors. The key feature of the unit is the ability to leave it deployed on the line to record readings every 15 minutes for 90+ days. It easily atiaches to the line with a standard insulating bar. Once on the line, it immediately begins to collect and record the primary current on the line.
3.  The Primary current sensor is equipped with a 433M wireless port for communicating the recorded data into the      user's PC. The data is downloaded through GF2018S PC-Link Software, which allows the user to download, view and      query the data stored on the Primary current recorder.
4.  The housing of the Primary current sensor is made of ABS+PC and is built to operate safely, even in severe utility environments. It is resistant to shock, waterproof and resistant to flame. It also operates within a wide temperature range. The Primary current recorder has a screw insulation bar of installation, which allows it to hang on the line securely in all weather conditions.
5.  PC-Link Software is a user-friendly software interface that allows the user to download, view, graph and export data  from the Primary current recorder into Microsoft Excel. The data directly transfers from the Primary current recorder into Excel through an 433M Port.

High voltage current collecting device for wireless
 

Product Parameters

 

Recording ammeter kit	3 wireless current sensors (GF2018A, GF2018B, GF2018C) 433 HHT(handheld terminal) or 433M wireless data reader(GF2018R) PC-LinkSoftware software(GF2018S) Carrying case
Data recording interval	5min, 10min,15min, 30min; Time can be set from 1 minute to 60 minutes
Communication distance(wireless)	Max 100m
Communication	433M, 868M or 915M (option)
Installation	Installation with electricity; Disassemble with electricity
Battery	3.6 volt lithium battery,9000mAh; Battery can be replaced
Software requirements	PC-Linksoftware & microsoft Excel
Processor	100 MHz or higher (200 MHz or higher recommended)
RAM	32 MB, 64M recommended
Drive space	15 MB to load software, 10 MB of operating Space
Use of position	Outdoor or indoor
Electrical parameters
Range of operation
Voltage	69kV,35kV,20KV, 10kV, 6kV
Current	1 to 300A
Sensor opening	Up to 3.3 cm