Q70 High Precision Clamp on AC Split Core Current Sensor
Applications
· Power quality measuring
· Large industrial loads
· HVAC
· Measuring around cable bundles
· Power load monitoring
· Waveform analysis
Features
· Measurement range of 1mA to 1000A AC
· Small, compact size, holding wire diameter 60mm× 70mm
· Improved ergonomic design and easy operation
· Conforms to EN 61010, 600V CAT III
· Low phase shift for power measurement
· Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters
· With load capacity≤ 4, When 1A output, it is 0.1; When 5A output, it is 2.5VA.
· Output model: Lead output(2.5m)
PARAMETERS
Electrical parametersMechanical parameters
|
| Ratio |
1000: 1 or 2000:1 (customized) |
| Accuracy class |
0.1%, 0.2%, 0.5% |
| Primary current |
0 - 1000A AC |
| Secondary current |
0 - 5A AC (customized) |
| Max. Cont. Input current |
1200A |
| Over voltage category |
CAT III 600V |
| Output signal |
200mA AC at nominal input current |
| Frequency range |
40Hz-2000Hz |
| Dielectric strength |
3KV 50Hz/60Hz at 1 minute |
| Temperature range |
-20°C to +55°C |
| Output |
2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors |
600 V |
| Standard |
EN 61010-1, EN 61010-2-032 |
| Installation |
clamp type |
| Output mode |
lead output(2.5m) |
|
| Dimensions (L x W x H) (mm) |
122 x 275 x 35.5 |
| Weight (g) |
720 |
| Holding wire diameter (mm) |
φ60 x 70 |
| Max. jaw opening (mm) |
60 |
Audited Supplier 
){kind=link}
){kind=link}