100 5 Split Core Current Transformer Ct′s for Metering

• Application: Electronic, Instrument, Position Sensor
• Type: Current Transformer
• Phase: Single
• Operation Condition: Indoor
• Usage: Protection, Measurement
• Winding Form: Single Layer & Tightly Wound Type
• Model NO.: FU-16
• Insulating Medium: Epoxy Resin
• Installation: Active Type
• Magnetic Circuit Structure: Single Stage Type
• Voltage Transformation Principle: Electromagnetic Type
• Ratio: 1000: 1 or 2000:1 , Customized
• Key Words: Current Transformers for Metering
• Key Word: DBP 100 5 Split Ct′s
• Model: DBP Split Core Current Transformer
• Rated Voltage: 720V
• Accuracy Class: 0.2%, 0.5 %, 1%
• Rated Primary Current: 20 a/30A/40A/50A/60A/80A/100A/150A/200A
• Output Signal: 10mA-200mA Acoptional 333mv AC or 100mv-2V Optonal
• Frequency Range: 40 Hz-500 Hz
• Max. Jaw Opening: 16 mm
• Transport Package: Standard Export Box
• Specification: 38mm x 55mm x 18 mm
• Trademark: GFUVE
• Origin: Beijing, China
• Production Capacity: 200pieces/Day

Product Description

product description

FU-16 series of split-core current transformer offers 333mV, 100mV-2V and 10mA-200mA at secondary from
sensed primary current. Without using secondary CT inside of meter, users directly connect FU-16 series to
meter for high accuracy metering application. It enables one meter to be adopted for various current rating by only changing primary CT so it makes compact meter design and reduces developing cost. Also, over-voltage protection circuit is included to offer safe, fast and cost effective installation.
Features
1. Most cost-effective
2. Faster installation
3. Safe and easy installations
4. High accuracy 0.5
5. Holding wire diameter: φ16mm
6. Measurement range of 1mA to 200A AC
7. Low phase shift for power measurement
8. Output model: Lead output(2.5m)
9. Isolated plastic case recognized according to UL94-V0
10. Small-size, compact size, light-weight
11. Over-Voltage protection circuit is installed.
12. UL / EN 61010 - 1 certified
Applications
1. Power meter and harmonic meters
2. Energy meter (kWh meter)
3. Recorders, loggers, oscilloscopes
4. Power quality monitoring
5. Switchgear
6. Distributed measurement systems
7. General Sets
8. Control panels

Technical parameters
Standards	IEC/EN60044-1 & IEC61010-1 & IEC61869-2&ANSI C57.13
Ratio	1000: 1 or 2000:1 , customized
Nominal input current(Primary current)	20A/30A/40A/50A/60A/80A/100A/150A/200A
Overload withstand	1.2 times rated current continuously
Accuracy	0.2%, 0.5 %, 1%
System Voltage	720V(0.72kV)
Output signal	10mA-200mA AC optional 333mV AC or 100mV-2V optional
Frequency range	40 Hz-500 Hz
Dielectric strength	3KV 50Hz/60Hz at 1 minute
Output	Standard 2.5 meter cable
Protection Level	3.0V0-P
Installation Category	CATII or CATIII 600VAC
Max. jaw opening	16 mm
Mechanical parameters
Dimensions (W×D×H) (mm)	38mm×55mm×18mm
Weight(g)	60
Operating conditions
Operating temperature	-25°C to +55°C
Relative Humidity	0-85% non-condensing
Altitude	<3500 meters
Condition	No existence of severely begrimed, erosive and  radioactive gas in the air. Permission of long-term  operation under rated current.

Ordering information
Be sure to the type, current ratio, accuracy class, rated load and use of the products when you plan to make a order. Special specifications could be customized. All kinds of different specifications and parameters current transformers can be made according to your needs.