High Performance 500A AC Clamp CT Sensor Q40 for Energy Meter

• Customization: Available
• After-sales Service: 24 Hours Service
• Warranty: 24 Hours Service
• Model NO.: Q40
• Ratio: 1000: 1, 2000:1 or 2000:1 (Customized)
• Accuracy Class: 0.1%, 0.2%, 0.5%
• Primary Current: 0-500A AC
• Max. Jaw Opening (mm): 40
• Transport Package: Wooden Box
• Specification: 82 x 290 x 25.3
• Trademark: GFUVE
• Origin: Beijing

Product Description

Q40 HIGH PERFORMANCE 500A AC CURRETN CLAMP CT SENSOR

The Q40 series AC Current clamp ct sensor are high performance models, and use a custom nickel core to improve accuracy and phase shift on the low end of the measurement range. The Q40 ct clamp sensor is an excellent probe to be used in power and low level current measurement applications detection. The range, transformation ratio, output interface of the sensor can be customized according to customer requirements. Q40 CT sensors, also known as current transformers or current sensors, are devices that measure the current running through a wire by using the magnetic field to detect the current and generate a proportional output. Q40 CT sensors can be used to measure less than 500A AC current circuit on site.

* UL, CE CNAS mark;

* 10Hz to 200kHz response;

* Holding wire diameter: φ40mm;

*Designed to EN 61010, 600V CAT III safety standard;

* Low phase shift for power measurement;

* Industrial design & beautiful appearance;

* High content nickel metal permalloy core;

* Measurement range of 1mA to 3000A AC;

* Suitable for 10A, 50A, 100A, 500A cable online measurement;

* Improved ergonomic design & easy operation;

* High precision 0.1% for current measurement;

* Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters;

* Power meter;

* Cable fault analysis;

* Large industrial loads;

* Power load monitoring;

* Data logging/recording;

* Energy meter calibrator;

* Power quality monitoring;

* Power and harmonic meters;

* Power quality analyzer (PQA);

* CT secondary current detection;

* Measuring around cable bundles;

* Waveform analysis (oscilloscopes meter);

Electrical parameters
Ratio	1000:1 or 2000:1 (customized)
Accuracy class	0.1%, 0.2%, 0.5%
Primary current	0-500A AC
Secondary current	0-500mA AC or 0-5V AC (customized)
Max. Cont. Input current	600A
Load capacity	≤10Ω, standard 4Ω
Over voltage category	CAT III 600V
Output signal (AC current)	250mA, 500mA, 1V, 5V AC at nominal input current
Output signal (AC voltage)	250mV, 500mV, 1V, 5V AC at nominal input current
Frequency range	40Hz-200KHz
Dielectric strength	3KV 50Hz/60Hz at 1 minute
Temperature range	-20°C to +55°C
Output	2.5 meter cable with D01 connector
Max. voltage not insulated conductors	720V
Standard	EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 600V CAT III
Installation	Clamp type
Output mode	Lead output (2.5m)
Connector	BNC, 4mm banana, signal cable (2 cores), customized
0-0.5A	≤0.5%
0.5-5	≤0.2%
5-600A	≤0.1%
0-0.5A	≤0.5°
0.5-5	≤0.2°
5-600A	≤0.1°
Dimensions (L x W x H)(mm)	82 x 290 x 25.3
Weight (g)	500
Holding wire diameter (mm)	φ40
Max. jaw opening (mm)	40
Jaw color	Black
Material	PC+ABS+Polycarbonate, UL94 V0
Max. jaw opening (mm)	120
Jaw color	Red & grey
Material	PC+ABS, UL94 V0

Company Profile