STS is an escrow service that protects both buyers and suppliers. Funds are held securely by Made-in-China.com until order terms (e.g., delivery, quality) are fulfilled
| Customization: | Available |
|---|---|
| Type: | Electromagnetic |
| Output Signal Type: | Analog Output |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
Payment Guarantee
Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Inspection Service
After-Sales & Dispute Handling
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The S150 ct clamp is a high performance AC Clamp on current transformer with excellent transformation and low phase shift. The high quality magnetic supermalloy core and uniform windings provide for accurate measurements up to 3000A AC/2000A AC/1000A AC/500A AC. The "ring type" jaw permits good magnetic conduction and cable positionings. Provide excellent RMS capabilities and reliable signal reproduction.
The S150 current transformer clamp is well suited for cable fault analysis and location and power quality applications where high accuracy and low phase shift along with wide frequency from 10Hz to 200kHz are important. Measurement range is 1mA to 3000A.
UL, CE CNAS mark;
Frequency 10-200kHz;
Using supermalloy core;
Holding wire diameter: φ150mm;
Conforms to EN 61010, 600V CAT III;
Measurement range of 1mA to 3000A AC;
Low phase shift for power measurement;
Industrial design & beautiful appearance;
Improved ergonomic design & easy operation;
High precision 0.1% for current measurement;
Transformation ratio: 100:1...3000:1, 200:5...2000:5, 3000:5;
Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters;
Power meter;
Power load monitoring;
Large industrial loads;
Power quality monitoring;
Power and harmonic meters;
Data logger/current recorder;
Power quality analyzer(PQA);
Measuring around cable bundles;
CT secondary current detection;
Cable fault analysis and location;
Energy meter calibration equipment;
Waveform analysis(oscilloscopes meter);
| Electrical parameters | |
|---|---|
| Ratio | 1000:1, 200:5 or... 3000:5(customized) |
| Accuracy class | 0.1%, 0.2%, 0.5% |
| Primary current | 0-3000A AC |
| Secondary current | 0-1A or 0-5A AC (customized) |
| Secondary voltage | 0-1V, 0-5V AC (customized) |
| Max. cont. input current | 3600A |
| Load capacity | ≤20Ω, standard 4Ω |
| Over voltage category | CAT III 600V |
| Output signal (AC current) | 500mA, 1A, 2A, 5A AC at nominal input current |
| Output signal (AC voltage) | 1V, 2V, 5V, 10V AC at nominal input current |
| Frequency range | 10Hz-200kHz |
| Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
| Temperature range | -40°C to +55°C |
| Output | 2.5 meter cable with D01 connector or BNC |
| Max. voltage not insulated conductors | 600V |
| Standard | EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 600V CAT III |
| Installation | Clamp type |
| Output mode | lead output(2.5m, 5m or 10m) |
| Connector | BNC, 4mm banana, signal cable(2 cores),customized |
| Range version | 100A, 200A, 400A, 500A, 1000A, 2000A, 3000A |
| Accuracy (3000A Range) | |
| 0-10A | ≤1% |
| 10-100 | ≤0.5% |
| 100-3000A | ≤0.2% |
| Phase Shift (3000A Range) | |
| 0-10A | ≤1° |
| 10-100 | ≤0.5° |
| 100-3000A | ≤0.2° |
| Mechanical parameters | |
| Dimensions (L × W × H)(mm) | 199 × 281 × 28 |
| Weight (g) | 1600 |
| Holding wire diameter (mm) | φ150 |
| Max. jaw opening (mm) | 150 |
| Jaw color | Red & grey |
| Material | PC+ABS, UL94 V0 |
){kind=link}