GFUVE Permalloy core clamp on type Current transformer XQ13 clamp-on CT is suitable for 0A-100A cable online measurement, it belongs to high performance transducer field. Up to 0.1% accuracy class, this current probe clamp is ideal for most oscilloscopes. The current signal can be measured directly. Suitable for accurate measurement of AC current using the permalloy core material. Frequency range 40Hz-200KHz, with standard 2.5-meter cable with D01 connector. EN 61010-1, EN 61010-2-032, IEC60044-1 Standard.
Applications
· Power quality measuring
· Large industrial loads
· Measuring around cable bundles
· Power load monitoring
· Waveform analysis
Features
· Measurement range of 1mA to 100A AC
· Small, compact size
· Improved ergonomic design and easy operation
· Conforms to EN 61010, 600V CAT III
· Low phase shift for power measurement
· Designed for DMMs, recorders, loggers, oscilloscopes, power, and harmonic meters
Ratio |
1000: 1, 2000:1 or 2500:1 (customized) |
Nominal input current |
100 A |
Max. Cont. Input current |
120 A |
Accuracy |
0.1 %,0.2% |
Load Capacity |
≤20Ω , Standard 4Ω |
Overvoltage category |
CAT III 600 V |
Output signal (AC current) |
From 0 to 100mA AC at nominal input current |
Output signal (AC voltage) |
From 0 to 5V AC at nominal input current |
Frequency range |
40 Hz....2000 Hz |
Dielectric strength |
3000 V 50Hz/60Hz at 1 minute |
Temperature range |
-20 °C...+55 °C |
Output |
2.5-meter cable with D01 connector |
Connector |
BNC, 4mm banana, Audio plug,customized |
Max. voltage not insulated conductors |
600 V |
Max. jaw opening |
20 mm |
Standard |
EN 61010-1 |
Dimensions |
52.5mm x 136.5mm x 28 mm |
Weight |
320 g |