S120 Used for Waveform Analysis on Oscilloscopes Meter Clamp Type on CT

• Customization: Available
• Type: Electromagnetic
• Output Signal Type: Digital Output
• Model NO.: S120
• Production Process: Integration
• Material: Metal
• Accuracy Grade: 0.1%, 0.2%, 0.5%
• Application: Used for Oscilloscope Meters
• IP Rating: IP67
• Certification: ISO
• Customized: Customized
• Transport Package: Carton
• Specification: 1200g, 178*290*30mm
• Trademark: GFUVE, UL, CE, CNAS mark
• Origin: China
• Production Capacity: 50000 Pieces/Year

Product Description

S120 UL, CE CNAS mark, 10-2MHz wide frequency, high content nickel metal permalloy core, current sensor

Product Description

The S120 current clamp is a high performance AC Clamp on current transformer probe with excellent transformation and low phase shift. The high quality magnetic permalloy core and uniform windings provide for accurate measurements up to 3000AAC/2000AAC/1000AAC/500AAC. The "ring type" jaw permits good magnetic conduction and cable positionings. Provide excellent RMS capabilities and reliable signal reproduction.

FEATURES

UL, CE CNAS mark;
Frequency 10-2MHz;
Holding wire diameter: φ120mm;
Conforms to EN 61010, 600V CAT III;
Low phase shift for power measurement;
Industrial design & beautiful appearance;
High content nickel metal permalloy core;
Measurement range of 1mA to 3000A AC;
Transformation ratio: 1000:1, 2000:5, 3000:5;
Improved ergonomic design & easy operation;
High precision 0.1% for current measurement;
Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters;

PARAMETERS

Ratio	1000:1, 2000:5 or 3000:5 (customized)
Accuracy class	0.1%, 0.2%, 0.5%
Primary current	0-3000A AC
Secondary current	0-1A or 0-5A AC (customized)
Secondary voltage	0-2V, 0-5V AC (customized)
Max. Cont. Input current	3600A
Load capacity	≤20Ω, standard 4Ω
Over voltage category	CAT III 600V
Output signal (AC current)	500mA, 1A, 2A, 5A AC at nominal input current
Output signal (AC voltage)	1V, 2V, 5V, 10V AC at nominal input current
Frequency range	10Hz-2MHz
Dielectric strength	3KV 50Hz/60Hz at 1 minute
Temperature range	-40°C to +55°C
Output	2.5 meter cable with D01 connector or BNC
Max. voltage not insulated conductors	600V
Standard	EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 600V CAT III
Installation	clamp type
Output mode	lead output(2.5m, 5m or 10m)
Connector	BNC, 4mm banana, signal cable (2 cores), customized
Range version	100A, 200A, 400A, 500A, 1000A, 2000A, 3000A
Accuracy (3000A range)
0-10A	≤0.5%
10-100	≤0.2%
100-3000A	≤0.1%
Phase shift (3000A range)
0-10A	≤0.5°
10-100	≤0.2°
100-3000A	≤0.1°