Q125B CABLE TYPE 3000A AC CURRENT SENSOR CLAMP WITH 5A OUTPUT
The Q125B current sensor clamp is a high performance AC Current clamp with excellent transformation and low phase shift. The high quality magnetic core and uniform windings provide for accurate measurements up to 1000A AC/2000A AC/3000A AC. The Round jaw permits 125mm cable positionings. Provide excellent TRMS capabilities and reliable signal reproduction. It is widely applied in electricity, communication, meteorology, railway, oilfield, construction, measurement, scientific and research teaching unit, industrial and mining enterprises. EN 61010-1, EN 61010-2-032, IEC61869-2 Standard.
the model Q125B 3000A/5A high accuracy Clamp CT Current Sensor is a high accuracy ct, the advanced design ensures enhanced linearity and the jaw opening system provides enhanced safety.
FEATURES
This product can be used in large current situation; also can cooperate to cable fault tester and cable identification device, used for cable test work.
Holding wire diameter: φ110mm
Dimension: 163mm×310mm×34mm
Load capacity: mA output≤4Ω, 1A output 0.1Ω, 5A output 2.5VA
Installation: clamp type
Output mode: lead output
PARAMETERS
Electrical parameters |
| Ratio |
1000: 1 or 2000:1 (customized) |
| Accuracy class |
0.2%, 0.5% |
| Primary current |
0 - 3000A AC |
| Secondary current |
0 - 5A AC (customized) |
| Output signal |
500mA,1A,5A AC at nominal input current |
| Frequency range |
40Hz-2000Hz |
| Dielectric strength |
3KV 50Hz/60Hz at 1 minute |
| Temperature range |
-20°C to +55°C |
| Output |
2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors |
600 V |
| Standard |
EN 61010-1, EN 61010-2-032 |
| Installation |
clamp type |
| Output mode |
lead output(2.5m) |
| Mechanical parameters |
| Dimensions (L x W x H) (mm) |
163 x 310 x 34 |
| Weight (g) |
900 |
| Holding wire diameter (mm) |
φ125 |
| Max. jaw opening (mm) |
125 |
Audited Supplier 
){kind=link}
){kind=link}