STS is an escrow service that protects both buyers and suppliers. Funds are held securely by Made-in-China.com until order terms (e.g., delivery, quality) are fulfilled
| Customization: | Available |
|---|---|
| Type: | Electromagnetic |
| Output Signal Type: | Analog Output |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
Payment Guarantee
Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Inspection Service
After-Sales & Dispute Handling
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The Q40 series AC Current clamp ct sensor are high performance models, and use a custom nickel core to improve accuracy and phase shift on the low end of the measurement range. The Q40 ct clamp sensor is an excellent probe to be used in power and low level current measurement applications detection. The range, transformation ratio, output interface of the sensor can be customized according to customer requirements. Q40 CT sensors, also known as current transformers or current sensors, are devices that measure the current running through a wire by using the magnetic field to detect the current and generate a proportional output. Q40 CT sensors can be used to measure less than 500A AC current circuit on site.
Multimeter;
Power meter;
Digital multi-meter;
Phase angle meter;
Energy sub-meters;
Waveform analysis;
Large industrial loads;
Power quality analyzer;
Power load monitoring;
Data logging/recording;
Power quality monitoring;
Multi-function energy meter;
Power and harmonic meters;
On site energy meter calibrator;
CT secondary current detection;
Measuring around cable bundles;
Small, compact size;
UL, CE, CNAS mark;
10Hz to 200kHz response;
Installation: clamp type design;
Holding wire diameter: φ40mm;
Measurement range of 1mA to 600A AC;
High content nickel metal permalloy core;
Lower phase shift for power measurement;
Improved ergonomic design and easy operation;
1mV/A AC, 10mV/A AC or 1mA/A AC output signals;
Designed to EN 61010, 600V CAT III safety standard;
Suitable for 10A, 50A, 100A, 500A cable online measurement;
Designed for DMMs, PQA, recorders, oscilloscopes and power meter;
| Electrical parameters | |
|---|---|
| Ratio | 1000:1 or 2000:1 (customized) |
| Accuracy class | 0.1%, 0.2%, 0.5% |
| Primary current | 0-500A AC |
| Secondary current | 0-500mA AC or 0-5V AC (customized) |
| Max. Cont. Input current | 600A |
| Load capacity | ≤10Ω, standard 4Ω |
| Over voltage category | CAT III 600V |
| Output signal (AC current) | 250mA, 500mA, 1V, 5V AC at nominal input current |
| Output signal (AC voltage) | 250mV, 500mV, 1V, 5V AC at nominal input current |
| Frequency range | 40Hz-200KHz |
| Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 720V |
| Standard | EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 600V CAT III |
| Installation | Clamp type |
| Output mode | Lead output (2.5m) |
| Connector | BNC, 4mm banana, signal cable (2 cores), customized |
| Accuracy (500A range) | |
| 0-0.5A | ≤0.5% |
| 0.5-5 | ≤0.2% |
| 5-600A | ≤0.1% |
| Phase shift (500A range) | |
| 0-0.5A | ≤0.5° |
| 0.5-5 | ≤0.2° |
| 5-600A | ≤0.1° |
| Mechanical parameters | |
| Dimensions (L x W x H)(mm) | 82 x 290 x 25.3 |
| Weight (g) | 500 |
| Holding wire diameter (mm) | φ40 |
| Max. jaw opening (mm) | 40 |
| Jaw color | Black |
| Material | PC+ABS+Polycarbonate, UL94 V0 |
){kind=link}