S50 Power Quality Measurement Current Clamp on CT BNC Connector

Product Description

1200A round jaw design S50 bandwidth oscilloscope AC current probe

Product Description

The round jaw design on the S50 series AC current clamp on CT along with the high content permalloy core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important from 10Hz to 10MHz. Measurement range is 1mA to 1200A.
The S50 clamp on ct is a general purpose 1200A AC current clamp designed for use with DMMs & BNC, power loggers and energy meter calibration instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The S50 clamp on CT has an integral 2.5m lead terminated. The rounded jaw design on this current clamp makes it well-suited for power applications where high accuracy 0.1% and low phase shift and wide frequency response are important.

FEATURES

UL, CE CNAS mark;
High content permalloy core;
Holding wire diameter: φ52mm;
Frequency 10Hz-10MHz bandwidth;
Conforms to EN 61010, 600V CAT III;
Measurement range of 1mA to 1200A AC;
Low phase shift for power measurement;
Industrial design & beautiful appearance;
Improved ergonomic design & easy operation;
High precision 0.1% for current measurement;

PARAMETERS

Ratio	1000:1, 2000:1, 1000:5 (customized)
Accuracy class	0.1%, 0.2%, 0.5%
Primary current	0-500A AC and 0-1000A AC
Signal output	1mV/A, 1mA/A
Secondary voltage	0-0.5V AC and 0-1V AC;
Secondary current	0-1A or 0-5A AC
Max. Cont. Input current	1200A
Load capacity	≤20Ω, standard 4Ω
Over voltage category	CAT III 600V
Frequency range	10Hz-10MHz
Dielectric strength	3KV 50Hz/60Hz at 1minute
Temperature range	-40°C to +55°C
Output	2.5 meter cable with D01 or BNC connector
Max. voltage not insulated conductors	600V
Standard	EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 600V CAT III
Installation	Clamp type
Range	10A, 100A, 1000A optional
Output mode	Lead output (2.5m)
Connector	BNC, 4mm banana, signal cable (2 cores), customized
Accuracy (1000A range)
0-10A	≤0.5%
10-100	≤0.2%
10-1200A	≤0.1%