XQ13 100A High Precision Clamp on AC Current Sensor
The model XQ13 100A current probe clamp sensor is suitable for 0A-100A cable online measurement, it belongs to high performance transducer field. Up to 0.1% accuracy class, this current probe clamp is suitable for most oscilloscopes. Current signal can be measured directly. Suitable for accurate measurement of AC current using the permalloy core material. Frequency range 40Hz-200KHz, with standard 2.5 meter cable with D01 connector. EN 61010-1, EN 61010-2-032, IEC60044-1 Standard.
Applications
· Power quality measuring
· Large industrial loads
· HVAC
· Measuring around cable bundles
· Power load monitoring
· Waveform analysis
Features
· Measurement range of 1mA to 100A AC
· Small, compact size
· Improved ergonomic design and easy operation
· Conforms to EN 61010, 600V CAT III
· Low phase shift for power measurement
· Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters
· With load capacity≤ 4
· Output model: Lead output(2.5m)
Specifications
| Ratio |
1000: 1 or 2000:1 , customized |
| Nominal input current |
100 A |
| Max. Cont. Input current |
120A |
| Accuracy |
0.1 %,0.2% |
| Over voltage category |
CAT III 600 V |
| Output signal |
100mA AC at nominal input current |
| Frequency range |
40 Hz....2000 Hz |
| Dielectric strength |
3KV 50Hz/60Hz at 1 minute |
| Temperature range |
-20 °C...+55 °C |
| Output |
2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors |
600 V |
| Max. jaw opening |
13 mm |
| Standard |
EN 61010-1 |
| Dimensions |
52.5mm x 136.5mm x 28 mm |
| Weight |
350 g |
){kind=link}