Portable Test-200 Electronic Measuring Instrument 200A C

Product Description

TEST-200200A PORTABLE PRIMARY CURRENT INJECTION TEST KIT

TEST-200 200A primary current injection test kit adopts ARM Chip to control its output process and large capacity of toroidal transformers. It is equipped with current meter; it can show primary current value, second current value, the action time and voltage value. Packing is used as aluminum alloy body with PC panel. LCD screen display single-phase protective relay test device of voltage and current output stopwatch; a full isolation, adjustable AC and DC voltage, AC direct current; an adjustable DC voltage and an adjustable AC voltage; output circuit with double overload protection, high output capacity, small size, light weight, high reliability.
Primary Injection Kit Compact Model TEST-200 is designed to operate on single phase 230/240 Volts AC 50/60 Hz. to develop smooth & continuous test current. The test set gives high current output at low cost and with inherent safety at minimum precaution. TEST-200 is mainly applied to Circuit Breaker testing in the power system, contact resistance test and relay test.

 

FEATURES

DC Voltage output up to 300V;

AC Voltage output up to 250V;

Max current output up to 250A;

Built-in digital timer resolution 1ms;

Thermal and short-circuit protection;

Permanent current up to 200 A, 2KVA;

Built-in digital ammeter 0.2% accuracy;

Small size, light weight, easy to test on-site;

Suite for all kinds of overcurrent relay testing;

With high precision 0.0000-99999S Stopwatch;

Current injection continuous output from 0-50A;

Have one channel DC Auxiliary Output from 0 to 220V;

 

FEATURES

DC Voltage output up to 300V;

AC Voltage output up to 250V;

Max current output up to 250A;

Built-in digital timer resolution 1ms;

Thermal and short-circuit protection;

Permanent current up to 200 A, 2KVA;

Built-in digital ammeter 0.2% accuracy;

Small size, light weight, easy to test on-site;

Suite for all kinds of overcurrent relay testing;

With high precision 0.0000-99999S Stopwatch;

Current injection continuous output from 0-50A;

Have one channel DC Auxiliary Output from 0 to 220V;

 

PARAMETERS

Electrical parameters
Accuracy	±0.5%
Power Supply (AC)	220V±10%·2000VA, 50Hz/60Hz or110V±10%·2000VA, 50Hz/60Hz
Current Output (AC)	200A·5V or 100A·10V
Capacity	2KVA
The current output waveform distortion	≤5%
Dual protection	overload electronic protection and software protection
Primary current
Range	0-250A
Resolution	0.1A
Accuracy	<0.5% RG
AC Voltage Output
Range	0-250V AC
Resolution	0.1V
Accuracy	<0.2% RG
DC Voltage Output
range	0-300V DC
Resolution	0.1V
Accuracy	<0.5% RG
Current Output duration
200A range	200A  1-2minutes 100A  3-6minutes 50A  Continuous
10A range	10A  Continuous
Stopwatch
Range	0.0000-99999S
Resolution	0.1mS
Accuracy	±5 words
Max input voltage (With contact and potential input)	DC 250V
Ammeter
Range	Inside 0.000-250.0A Outside 0.000-6.000A(AC or DC)
Accuracy	<0.2%
Voltmeter
Range	0.0-600.0V(AC or DC)
Accuracy	<0.2%
Measuring mode	AC True RMS DC Average value
Auxiliary Contacts
Binary input/output	one, AC250V*1A or DC120V*1A
DC Auxiliary Output
Range	0-110V DC, max 0.5A; 110-220V DC, max 0.5A
Interface
Serial interface	RS232
LCD	320*240 Greenlight LCD display
Resistor
Resistance	0.5Ω-2.5kΩ
Capacitor	10 μF, max voltage 450 V AC
Standard
Standard	2006/95/EC, EMC 2004/108/EC, IEC61000, IEC61010, IEC 61326
Mechanical parameters
Dimensions (W×D×H) (mm)	340×270×250
Weight(kg)	22.5
Environmental conditions
Operating Temperature	-10°C to 50°C
Storage temperature	-40°C to 70°C
Humidity range	Relative humidity 5 ... 95 %, non-condensing

SELECTION GUIDE

Model	Accuracy	Primary Current	Ammeter(0-6A)	Timer	Power	Injection Current time	Dimension(W×D×H) (mm)	Weight	Remark
TEST-200	0.50%	0-200A	YES	YES	2KVA	200A: 2-3min; 100A:3-6min	340×270×250	22.5KG	Integrated structure
TEST-901	0.50%	0-1100A	YES	YES	5KVA	1000A: 2-3min; 500A:3-6min	430×260×260	25KG	Integrated structure
TEST-902	0.50%	0-2200A	YES	YES	12KVA	2000A:2-3min; 1000A:3-6min	360×300×295 and 320×300×300	35KG+15KG	Fission structure
TEST-903	0.50%	0-3300A	YES	YES	15KVA	3000A: 2-3min; 1500A:3-6min	380×350×360 and 340×290×420	48KG+42KG	Fission structure
TEST-905	0.50%	0-5500A	YES	YES	30KVA	5000A:2-3min; 2500A:3-6min	430×430×445 and 550×450×600	68KG+55KG	Fission structure