High Precision 1000A Oscilloscope Current Probe Q70 Clamp-on Type

• Customization: Available
• After-sales Service: 24 Hours Service
• Warranty: 24 Hours Service
• Model NO.: Q70
• Max. Jaw Opening (mm): 60
• Jaw Color: Black
• Accuracy Class: 0.2%, 0.5%, 1%
• Ratio: 1000: 1, 2000:1 (Customized)
• Transport Package: Wooden Box
• Specification: 122 x 275 x 35.5
• Trademark: GFUVE
• Origin: Beijing

Product Description

Q70 HIGH PRECISION 1000A CLAMP ON OSCILLOSCOPE CURRENT PROBE

The model Q70 oscilloscope current probe, it is suitable for 0-1000A current measurement, both cable and copper bus bar online measurement. Its core is made by Permalloy, the influence of external magnetic field is very small, which ensures the high accuracy, high stability and high reliability of uninterrupted measurement long time. The sensor could output current and voltage signal, the range, transformation ratio can be customized.

* UL, CE CNAS mark;

* High content permalloy core;

* Holding wire diameter: φ60mm×70mm;

*  Frequency 40Hz-20kHz bandwidth;

* Conforms to EN 61010, 600V CAT III;

* Measurement range of 1mA to 1000A AC;

* Low phase shift for power measurement;

* Industrial design & beautiful appearance;

* Improved ergonomic design & easy operation;

* High precision 0.1% for current measurement;

* Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters;

* Power meter;

* Phase angle meter;

* Energy sub-meters;

* Cable fault analysis;

* Power load monitoring;

* Large industrial loads;

* Data logging/recording;

* Energy meter calibrator;

* Earth resistance meter;

* Power quality monitoring;

* power and harmonic meters;

* Power quality analyzer (PQA);

* CT secondary current detection;

* Measuring around cable bundles;

* Waveform analysis (oscilloscopes meter);

Electrical parameters
Ratio	1000:1 or 2000:1 (customized)
Accuracy class	0.2%, 0.5%, 1%
Primary current	0-1000A AC
Secondary current	0-1A AC, 0-5A AC (customized)
Max. Cont. Input current	1200A
Load capacity	≤2.5VA or 4Ω
Over voltage category	CAT III 600V
Output signal (AC current)	500mA, 1A, 5A AC at nominal input current
Output signal (AC voltage)	500mV, 1V, 5V AC at nominal input current
Frequency range	40Hz-2000Hz
Dielectric strength	3KV 50Hz/60Hz at 1 minute
Temperature range	-20°C to +55°C
Output	2.5 meter cable with D01 connector
Max. voltage not insulated conductors	720V
Standard	EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 600V CAT III
Installation	Clamp type
Output mode	Lead output (2.5m)
Connector	BNC, 4mm banana, signal cable (2 cores), customized
Dimensions (L x W x H)(mm)	122 x 275 x 35.5
Weight (g)	720
Holding wire diameter (mm)	φ60 x 70
Max. jaw opening (mm)	60
Jaw color	White
Material	PC+ABS, UL94 V0
Material	PC+ABS+Polycarbonate, UL94 V0
10-1200A	≤0.1°
Dimensions (L x W x H)(mm)	105 x 218 x 30
Weight (g)	650
Holding wire diameter (mm)	φ52
Max. jaw opening (mm)	52
Jaw color	Red & grey
Material	PC+ABS, UL94 V0

Company Profile