Q8 10A/10mA Cable Type Current Test CA Clamp on Probe 5A
Applications
· Power quality measuring
· Large industrial loads
· HVAC
· Measuring around cable bundles
· Power load monitoring
· Waveform analysis
Features
· Measurement range of 1mA to 10A AC
· Small, compact size
· Improved ergonomic design and easy operation
· Conforms to EN 61010, 600V CAT III
· Low phase shift for power measurement
· Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters
· Output model: Lead output (2.5m)
| Ratio |
1000: 1 or 2000:1 , customized |
| Nominal input current |
10 A |
| Max. Cont. Input current |
12 A |
| Accuracy |
0.5 %, 0.2% |
| Over voltage category |
CAT III 600 V |
| Output signal |
10mA AC at nominal input current |
| Frequency range |
40 Hz....2000 Hz |
| Dielectric strength |
3KV 50Hz/60Hz at 1 minute |
| Temperature range |
-20 °C...+55 °C |
| Output |
2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors |
600 V |
| Max. jaw opening |
8 mm |
| Standard |
EN 61010-1 |
| Dimensions |
42.6mm x 122.5mm x 23 mm |
| Weight |
225 g |
Audited Supplier 
){kind=link}
){kind=link}