Q125B Precision Current Clamps
The Q125B current sensor clamp is a high performance AC Current clamp with excellent transformation and low phase shift. The high quality magnetic core and uniform windings provide for accurate measurements up to 1000A AC/2000A AC/3000A AC. The Round jaw permits 125mm cable positionings. Provide excellent TRMS capabilities and reliable signal reproduction. It is widely applied in electricity, communication, meteorology, railway, oilfield, construction, measurement, scientific and research teaching unit, industrial and mining enterprises. EN 61010-1, EN 61010-2-032, IEC61869-2 Standard.
Applications
· Power quality measuring
· Large industrial loads
· HVAC
· Measuring around cable bundles
· Power load monitoring
· Waveform analysis
Features
· Measurement range of 1mA to3000A AC
· Small, compact size; Holding wire diameter 125mm
· Improved ergonomic design and easy operation
· Conforms to EN 61010, 600V CAT III
· Low phase shift for power measurement
· Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters
· Output model: Lead output(2.5m)
| Ratio |
1000: 1 or 2000:1 , customized |
| Nominal input current |
3000 A |
| Max. Cont. Input current |
3600A |
| Accuracy |
0.2%,0.5% |
| Over voltage category |
CAT III 600 V |
| Output signal |
500mA,1A,5A AC at nominal input current |
| Frequency range |
40 Hz....2000 Hz |
| Dielectric strength |
3KV 50Hz/60Hz at 1 minute |
| Temperature range |
-20 °C...+55 °C |
| Output |
2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors |
600 V |
| Max. jaw opening |
125 mm |
| Standard |
EN 61010-1 |
| Dimensions |
116mm x 327mm x 35mm |
| Weight |
1300 g |
Audited Supplier 
){kind=link}
){kind=link}