| Customization: | Available |
|---|---|
| Certification: | CCC |
| Protection: | Corrosion Resistance |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The FQ-RCT02 flexible current sensor is an AC current sensor composed of a flexible Rogowski coil. The flexible current sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. It is suitable for large current measuring. They combine the benefits of a thin, flexible, clip-around Rogowski (sense) coil with a signal conditioner providing accurate, true rms measurement, of voltage output 100mV/kA. Models range from 1A to 100,000Arms with an accuracy of 1% of reading. Rated EN 61010, 600V CAT IV, 1000V CAT III. Low cost AC current measurement probe designed to plug into digital multimeters, oscilloscopes, power quality analysis and power or harmonic meters. The length of the flexible current sensor can be selected from 40cm to 100cm. Fits around large or small conductors. Capable of getting into tight or difficult spaces. Ideal for measuring AC current in a group of conductors.
CNAS, UL, CE mark;
High times harmonic measurement;
Frequency 0.1Hz-10MHz Bandwidth;
Conforms to EN 61010, 1000V CAT III;
Measurement range of 1A to 100KA AC;
Low phase shift for power measurement;
High permeability magnetic material core;
Improved ergonomic design & easy operation;
Holding wire diameter: φ305mm/190mm/120mm;
100mV/kA or 85mV/kA or 50mV/kA output signal;
Excellent linearity 0.2% for current measurement;
Designed for DMMs, oscilloscopes, recorders, power and harmonic meters;
Multimeter;
Power meter;
Power recorders;
Energy sub-meters;
Oscilloscopes meter;
Power load monitoring;
Data logging/recording;
Power quality analyzer;
Energy meter calibrator;
Power and harmonic meters;
Measuring around cable bundles;
| Dimensions(mm) | FQ-RCT02-120 | FQ-RCT02-190 | FQ-RCT02-305 |
|---|---|---|---|
| Window A | 120 | 190 | 305 |
| Coil OD B | 145 | 205 | 335 |
| Coil Length C | 400 | 600 | 1000 |
| Output connection | 1. UL2586-ESB 2x24AWG L=150cm (as required) 2. Coax terminated with safety male BNC connector L=250cm (as required) 3. UL2586-ESB 2x24AWG L=150cm (as required) with integrator |
||
| Electrical parameters | ||||
|---|---|---|---|---|
| Model | FQ-RCT02-120 | FQ-RCT02-190 | FQ-RCT02-305 | |
| Current range | 1A - 100kA | |||
| Frequency | 10Hz - 20kHz | |||
| Output voltage | Rated current | 1000A/2000A | 2000A/3000A | 3000A/6000A |
| 50Hz | 100mV/200mV AC | 200mV/300mV AC | 300mV/600mV AC | |
| Max output | 10kA or 100kA | |||
| Accuracy | <1% @25°C (45-65Hz) | |||
| Phase error | <60' @25°C (45-65Hz) | |||
| Output sensitivity | 50mV/kA, 85mV/kA, 100mV/kA (50Hz) | |||
| Coil section diameter | 8mm | |||
| Output sensitivity | ±2% Max (No Calibration) ±0.5% @25°C (With Calibration) |
|||
| Linearity error | ±0.2% RD | |||
| Position Sensitivity | ±1% | |||
| External Influence | ±1% Max | |||
| Bandwidth | 0.1Hz - 10MHz(-3dB) | |||
| Power Supply | / | |||
| Lead length | 2.5m | |||
| Standard | EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 1000V CAT III |
|||
| Weight | 150g - 230g | |||
| Degree of protection | IP67 | |||
| Operation temperature | -30°C to +80°C | |||
| Storage temperature | -40°C to +90°C | |||
| Notes: Can be customized current probe according to user requirements! | ||||
){kind=link}