Q125 High Precision Clamp on Current Transformer Current Sensor
BUS BAR AC 2000A CLAMP ON CURRENT TRANSFORMER
Product Description
Square jaw bus bar compact current transformer belongs to high performance transformer field. It is a high accuracy AC current transformer which can measure and analyze a variety of electric parameter without power outage, and the difficult part in technology development is that the high quality magnetic core requests open freely.
The model Q125 2000A current transformer clamp on measuring instrument can be used for a current vector for the copper bar or the power aluminum bus bar on-line detection. It has a 120mm * 50mm square hole, make it specially suitable for bus bar current measurement. In this method, there is no need to break a circuit or to affect the isolation to measure the current. it can be applied for energy meter & power meter, Standard IEC61869 & CE. easy installation, measurement 3000A big current value.
Applications
Power quality measuring
Large industrial loads
Measuring around cable bundles
Power load monitoring
Waveform analysis
Features
Measurement range of 1mA to3000A AC
Small, compact size; Holding wire diameter 120mm× 50mm
Improved ergonomic design and easy operation
Conforms to EN 61010, 600V CAT III
Low phase shift for power measurement
Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters
Output model: Lead output (2.5m)
| Primary current |
Secondary current |
Precision |
| 180A ~ 1000A |
30mA |
Class 0.5% |
| 1000A ~ 2000A |
250mA |
Class 0.1%, 0.2%, 0.5% |
| 1000A ~ 3000A |
500mA |
Class 0.1%, 0.2%, 0.5% |
| 300A ~ 1000A |
1A |
Class 0.2%, 0.5% |
| 1000A ~ 3000A |
1A |
Class 0.1%, 0.2%, 0.5% |
| 300A ~ 1000A |
5A |
Class 0.5% |
| 1000A ~ 3000A |
5A |
Class 0.2%, 0.5% |
| Ratio |
1000: 1 or 2000:1 , customized |
| Nominal input current |
3000 A |
| Max. Cont. Input current |
3600A |
| Accuracy |
0.2%,0.5% |
| Over voltage category |
CAT III 600 V |
| Output signal |
500mA,1A,5A AC at nominal input current |
| Frequency range |
40 Hz-2000 Hz |
| Dielectric strength |
3KV 50Hz/60Hz at 1 minute |
| Temperature range |
-20 °C to +55 °C |
| Output |
2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors |
600 V |
| Max. jaw opening |
50 mm |
| Standard |
EN 61010-1 |
| Dimensions |
116mm x 327mm x 35mm |
| Weight |
1200 g |
Audited Supplier 
BUS BAR AC 2000A CLAMP ON CURRENT TRANSFORMER
){kind=link}
){kind=link}