| Customization: | Available |
|---|---|
| Type: | Electromagnetic |
| Output Signal Type: | Digital Output |
|
Still deciding? Get samples of US$ 108/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The model Q8A1 current probe/clamp on ct is based on AC transformer technology for use in measurement of AC current, it is suitable for 5A, 10A cable online measurement. With measurement range of 1 mA to 10A AC and frequency range from 40Hz to 200KHz, it has a high accuracy class of 0.1%. It suits for oscilloscope, power quality analyzer, electric energy meter calibrator. Easy to operate everywhere. its technical standard according to EN 61010-1, EN 61010-2-032, IEC60044-1. This model Q8A1 clamp on current probe have been used in many instrument manufacturers.
Power meter;
Digital multi-meter;
Energy sub-meters;
Oscilloscopes meter;
Leakage current meter;
Power quality analyzer;
Data logging/recording;
Power quality monitoring;
Phase volt-ampere meter;
Multi-function energy meter;
Power and harmonic meters;
CT secondary current detection;
Energy meter calibrator (on site);
UL, CE, CNAS mark;
Holding wire diameter: φ8mm;
Installation: clamp type design;
2-128th harmonic measurement;
Frequency 10Hz-2MHz Bandwidth;
Measurement range of 1mA to 12A AC;
Low phase shift for power measurement;
High content nickel metal permalloy core;
Min 1mA for leakage current measurement;
Conforms to EN 61010-2-032, 600V CAT III;
Improved ergonomic design & easy operation;
High precision 0.1% for current measurement;
Designed for DMMs, recorders, oscilloscopes, harmonic meters etc.;
| Ratio | 1000: 1, 2000:1 or 2500:1 (customized) |
| Accuracy class | 0.1 %,0.2% |
| Primary current | 0 - 5A AC, 0 - 10A AC, 0 - 20A AC |
| Secondary current | 0 - 2.5mA, 0-5mA, 0-10mA, 0-20mA AC (customized) |
| Secondary voltage | 0 - 50mV, 0-100mV, 0-200mV, 0-1V, 0-5V AC (customized) |
| Max. Cont. Input current | 24A |
| Load capacity | ≤20Ω , Standard 4Ω |
| Over voltage category | CAT III 600V |
| Output signal (AC current) | From 0 to 10mA AC at nominal input current |
| Output signal (AC voltage) | From 0 to 100mV AC at nominal input current |
| Signal ratio | 1mA/A, 1mV/A, 10mV/A, 100mV/A |
| Frequency range | 10Hz-200KHz |
| Dielectric strength | 3KV 50Hz/60Hz at 1minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 720 V |
| Standard | EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 600V CAT III |
| Installation | Clamp type |
| Output mode | Lead output (2.5m) |
| Connector | BNC, 4mm banana, Audio plug,customized |
){kind=link}