Customization: | Available |
---|---|
Application: | Instrument |
Type: | Current Transformer |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Especificaciones
Applications | Features |
1. Electric energy meter calibrator (on site) 2. Double clamp type ground resistance tester 3. Double clamp type phase volt-ampere meter 4. Digital multi-meter 5. Multi-function energy meter 6. Oscilloscope 7. Power quality analyzer 8. Matched instruments 9. Calibration instrument on site |
1. Measurement range of 1A to 3600A AC 2. Large jaw opening designed 3. Improved ergonomic design and easy operation 4. Conforms to EN 61010, 600V CAT III 5. Low phase shift for power measurement 6. Nominal range: 1 to 1000AAC, 1 to 2000AAC, 1 to3000AAC 7. Transformation ratio: 1000:5, 2000:5, 3000:5 8. Output:5mA AC/A AC, 2.5mA AC/A AC, 1.666mA AC/A AC 9. Designed for use on DMMs, power and harmonic meters, recorders or instruments with AC current ranges 10. UL, CE mark |
Electrical parameters | |
---|---|
Ratio | 1000: 1 or 2000:1 (customized) |
Accuracy class | 0.2%, 0.5%, 1% |
Primary current | 0 --3000A AC |
Secondary current | 0 - 5A AC (customized) |
Max. Cont. Input current | 3600A |
Over voltage category | CAT III 600V |
Output signal (AC current) | 500mA,1A,5A AC at nominal input current |
Output signal (AC voltage) | 500mV,1V,5V AC at nominal input current |
Frequency range | 40Hz-2000Hz |
Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
Temperature range | -20°C to +55°C |
Output | 2.5 meter cable with D01 connector |
Max. voltage not insulated conductors | 600 V |
Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 |
Installation | Clamp type |
Output mode | Lead output(2.5m) |
Mechanical parameters | |
Dimensions (L x W x H) (mm) | 180 x 319 x 35 |
Weight (g) | 1100 |
Holding wire diameter (mm) | φ125 |
Max. jaw opening (mm) | 125 |
Jaw Color | Black |
Material | PC+ABS+Polycarbonate, UL94 V0 |