Current Probe Sensor High Sensitivity 0.1% Permalloy Core CT AC Current Clamp

Product Description

Q8A-2 10A High sensitivity 0.1% permalloy core ct AC current clamp
The model Q8A-2 permalloy core 10A High Precision Clamp on Current sensor with high accuracy up to 0.1% has been designed for use with multimeters, recorders, power analysers, safety testers etc.

Clamp-type alternating current sensor is a current transformer which can detect alternating current at non-contact. This divided type sensor allows mounting in existing circuits without interrupting the power supply.

Clamp-On Current Sensor Current Sensors Industrial Current Sensors are available at Mouser Electronics. Mouser offers inventory, pricing, & datasheets for Clamp-On Current Sensor Current Sensors Industrial Current Sensors.
A current sensor is a device that detects electric current (AC or DC) in a wire, and generates a signal proportional to it. The generated signal could be analog voltage or current or even digital output. It can be then utilized to display the measured current in an ammeter or can be stored for further analysis in a data acquisition system or can be utilized for control purpose.

Applications
· Power quality measuring
· Large industrial loads
· HVAC
· Measuring around cable bundles
· Power load monitoring
· Waveform analysis

Features
· Measurement range of 1mA to 10A AC
· Small, compact size
· Improved ergonomic design and easy operation
· Conforms to EN 61010, 600V CAT III
· Low phase shift for power measurement
· Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters
· With load capacity≤ 4
· Output model: Lead output(2.5m)

Ratio	1000: 1 or 2000:1 , customized
Nominal input current	10 A
Max. Cont. Input current	12 A
Accuracy	0.1 %,0.2%
Over voltage category	CAT III 600 V
Output signal	10mA AC at nominal input current
Frequency range	40 Hz....2000 Hz
Dielectric strength	3KV 50Hz/60Hz  at 1 minute
Temperature range	-20 °C...+55 °C
Output	2.5 meter cable with D01 connector
Max. voltage not insulated conductors	600 V
Max. jaw opening	8 mm
Standard	EN 61010-1
Dimensions	45mm x 158mm x 25 mm
Weight	250 g