T-203h Portable Transformer Turns Ratio Tester

Product Description

Product Description

T-203H THREE PHASE HANDHELD TRANSFORMER TURNS RATIO METER
T-203H three phase power transformer turns ratio meter adopts three-phase power supply output voltage, the test speed Instrument to adopt advanced technology for A/D, wide range range; High speed ARM as the core digital processor, test quickly; English menu display, Elaborate and handheld design, makes the T-203H TTR meter superior and powerful with small size and light weight. The TTR meter uses a programmable signal source technology. It is especially suitable for special transformers such as Z-type transformers, rectifier transformers, Scott or anti-Scott transformers, etc. The T-203H TTR tester adopts the new algorithm developed by our company to measure the ratio of three-phase transformer and ensure the measurement accuracy without adjusting the balance of the three-phase power supply. Therefore, the transformer turns ratio and wiring method can be measured in one minute.

Product Features

1. It can conduct single-phase measurement and three-phase winding automatic test;
2. Input single power, internal digital combination standard sine wave test source output;
3. Three phase turns ratio value, phase angle value, error, tapping position, tapping value can be measured for once.
4. It also can identify connecting group number automatically;
5. Phase angle measurement function: measure the phase angle between high voltage side and low voltage side; Measure the turns ratio and phase angle of "Non integral point" transformer;
6. With small size and light weight, it is easy to carry;
7. With functions of turns ratio measurement and voltage TTR measurement;
8. With 5.6 inch color LCD, the effect of data & figure display is visualized and fine;
9. With built-in high capacity chargeable lithium battery. Test can be conducted without any power supply on site, and once the battery is charged fully, it can make measurement for more than 500 times continuously;
10. With tapping test function: TTR and TTR error in the position of each tapping switch can be gauged quickly. Just input rated TTR once, instead of input over and over again, TTR error in tapping position can be calculated;
11. With blind test function: There is no need to choose connecting method and group. When measuring Y/△, △/Y transformer, no external short-circuit is needed, connecting method can be shifted automatically according to the chosen testing contents;

Product Parameters

Electrical parameters
Power supply		7.2V Lithium-ion rechargeable battery
Test power		AC 15V
Data storage		500 groups
TTR measurement accuracy	Range1	0.8-3000:0.05%±2words;
	Range2	3000-10000:0.1%±2words;
Display precision		5 Bits, resolution ratio: 0.0001
Phase range		0.00°-360.00°
Phase resolation		0.01°
Phase angle accuracy Ratio		0.1°
Vector diagram		Yes
Voltage accuracy on HV side		0.05%
Voltage accuracy on LV side		0.1%
LCD		5.6″ color LCD display
Key		30 pcs
Test Cable		10m
Calipers		4pcs (big), 4pcs (small)
Communication port		RS232 , USB
Printer		Yes, Optional
Degree of protection		IP52
Standard		IEEE C57.152-2013, IEC 60076-1:2011, AS/NZS 60076.1:2014, CIGRE 445, IEC61010-1, IEC61326-1
Mechanical parameters
Dimension (L×W×H) (mm)		260x160x60
Weight (kg)		1.6, 4.5(with printer)
Environmental conditions
Operating temperature		-10°C to 50°C
Storage temperature		-20°C to 70°C
Relative humidity		≤85%RH

Product Photos

Company Profile

Packaging & Shipping

After Sales Service