Q8a1 High Precision CE/CNAS Mark AC Current Clamp on CT

Product Description

Q8A1 HIGH PRECISION 5A CLAMP ON CURRENT PROBE OPERATED EVERYWHERE

Product Description

The model Q8A1 current probe/clamp on ct is based on AC transformer technology for use in measurement of AC current, it is suitable for 5A, 10A cable online measurement. With measurement range of 1 mA to 10A AC and frequency range from 40Hz to 200KHz, it has a high accuracy class of 0.1%. It suits for oscilloscope, power quality analyzer, electric energy meter calibrator. Easy to operate everywhere. its technical standard according to EN 61010-1, EN 61010-2-032, IEC60044-1. This model Q8A1 clamp on current probe have been used in many instrument manufacturers.

FEATURES

Holding wire diameter: φ8mm;
Installation: clamp type design;
2-128th harmonic measurement;
Frequency 10Hz-2MHz Bandwidth;
Measurement range of 1mA to 12A AC;
Low phase shift for power measurement;
High content nickel metal permalloy core;
Min 1mA for leakage current measurement;
Conforms to EN 61010-2-032, 600V CAT III;
Improved ergonomic design & easy operation;
High precision 0.1% for current measurement;
Designed for DMMs, recorders, oscilloscopes, harmonic meters etc.;

PARAMETERS

Ratio	1000: 1, 2000:1 or 2500:1 (customized)
Accuracy class	0.1 %,0.2%
Primary current	0 - 5A AC, 0 - 10A AC, 0 - 20A AC
Secondary current	0 - 2.5mA, 0-5mA, 0-10mA, 0-20mA AC (customized)
Secondary voltage	0 - 50mV, 0-100mV, 0-200mV, 0-1V, 0-5V AC (customized)
Max. Cont. Input current	24A
Load capacity	≤20Ω , Standard 4Ω
Over voltage category	CAT III 600V
Output signal (AC current)	From 0 to 10mA AC at nominal input current
Output signal (AC voltage)	From 0 to 100mV AC at nominal input current
Signal ratio	1mA/A, 1mV/A, 10mV/A, 100mV/A
Frequency range	10Hz-200KHz
Dielectric strength	3KV 50Hz/60Hz at 1minute
Temperature range	-20°C to +55°C
Output	2.5 meter cable with D01 connector
Max. voltage not insulated conductors	720 V
Standard	EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 600V CAT III
Installation	Clamp type
Output mode	Lead output (2.5m)
Connector	BNC, 4mm banana, Audio plug,customized