Three Phase Power Quality Analyzer Power and Harmonics Analyzer with Monitoring

• Safety: 600 V Cat IV/1000 V Cat III
• Waveform Measurement: 0-200kHz
• Power Quality Standard: En50160
• Type: Handheld Portable
• Transport Package: Standard Export Box
• Specification: CE, ISO9001
• Model NO.: E6000
• Trademark: GFUVE
• Origin: Beijing, China
• Production Capacity: 100set/ Month

Product Description

E6000 Power and harmonics analyzer with monitoring

Product Description

Power Quality Analyzers Power quality analyzers identify issues with power quality which typically manifest as dips, swells, harmonic distortion, unbalance, flicker, and transients. Power quality determines the suitability of electrical power to drive motors, machines and other end user devices. Three phase power quality analyzers are ideal for troubleshooting, logging, and creating detailed reports in conjunction with the easy-to-use Energy Analyze Plus or GFUVEPQA software. Find the right power quality tool. Find and solve power quality problems. As with any troubleshooting task, you need the right tools to get the job done. GFUVE portable power meters and analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The new and improved GF438II is a power quality analyzer for monitoring and recording power supply anomalies, allowing their causes to be quickly investigated, and also for assessing power supply problems such as voltage drops, flicker, harmonics, and other electrical issues. New features include the ability to drive current sensors (5A, 100A, 500A, 1000A, 3000A, 6000A)straight from the PQA and enhanced recording capabilities.

 

Feature

 

Troubleshoot real-time: Analyze the trends using the cursors and zoom tools-even while background recording continues.
Automatic Transient Mode: Capture 200 kHz waveform data on all phases simultaneously up to 6 kV
Measure all three phases and neutral: With included four current probes
System-Monitor: Up to ten power quality parameters on one screen according to EN50160 power quality standard
View graphs and generate reports: With included analysis software
Logger function: Configure for any test condition with memory for over 400 parameters at user defined intervals.
Mains signaling: Measure interference from ripple control signals at specific frequencies
Inrush mode: For troubleshooting nuisance circuit breaker tripping.
AutoTrend: Every measurement you see is always automatically recorded, without any setup.
Fully Class-A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class-A standard.
Battery Life: Seven hours operating time per charge on NiMH battery pack
High safety rating: 600 V CAT IV/1000 V CAT III rated for use at the service entrance
? Comparing to online power quality analyzer, E6000 handheld type with small size, light weight, easy for the engineer to carry and carry out to survey work whenever and wherever.
 ? Easy to wiring
 ? It can operate directly to the line under test under the circumstances that the Power Grid without interrupt.
 ? Multi-range current switching
 ? based on actual demand, the different range of current clamp can be replaced to improve measurement accuracy.
 

Application

 

Frontline troubleshooting - quickly diagnose problems on-screen to get your operation back online
Predictive maintenance - detect and prevent power quality issues before they cause downtime
Quality of service compliance - validate incoming power quality at the service entrance
Long-term analysis - uncover hard-to-find or intermittent issues
Load studies - verify electrical system capacity before adding loads
Energy assessments - quantify energy consumption before and after improvements to justify energy saving devices.