Dielectric Insulation Current Transformer Test Equipment

• Customization: Available
• After-sales Service: Yes
• Warranty: Yes
• Model NO.: GF106
• Power Supply: AC 220V±10% or AC 110V±10%, 50/60Hz
• Excitation Output Voltage: 0-220vrms
• Excitation Output Current: 0-5arms (20A Peak-Value)
• Automatic Frequency Variation Range: 0.1-60Hz
• Equivalent Excitation Voltage: ≤5000V
• Weight (Kg): ≤10
• Relative Humidity: 90rh%
• Operating Temperature: -10°c to +40°c
• Altitude: ≤2000m
• Transport Package: Standard Package
• Specification: 410 x 250 x 300
• Trademark: GFUVE
• Origin: China
• Production Capacity: 100000 Pieces/Mes

Product Description

GF106 CT/PT TESTER is mainly used for field testing, it can finish the measurements (M) and protection (P) class CT, PT and TYP class CT. Adopt LCD, self-equipped mini type printer supporting field printing; supporting to use USB flash disk to dump data, with simple and convenient operation.
 

Electrical parameters
Accuracy		0.05%, 0.1%
Power supply		AC 220V±10% or AC 110V±10%, 50/60Hz
Excitation output voltage		0-220Vrms
Excitation output current		0-5Arms (20A peak-value)
Automatic frequency variation range		0.1-60Hz
Equivalent excitation voltage		≤5000V
Accuracy		≤0.5% (0.2%RD+0.3%RG)
Secondary winding DC resistance measurement	Range	0.1-300Ω
	Accuracy	≤0.5% (0.2%RD+0.3%RG)
Secondary actual load measurement	Range	5VA-1000VA
	Accuracy	≤0.5% (0.2%RD+0.3%RG)±0.1VA
CT/PT phase error measurement	Accuracy	±4min
	Resolution	0.01min
CT ratio error measurement	Range	1-30000
	Accuracy	≤0.5%
PT ratio error measurement	Range	1-10000
	Accuracy	≤0.5%
Standards
Reference standards		GB1207-2006, GB1208-2006, GB16847-1997 IEC60044-1, IEC60044-6, IEC61869-2-2012
Safety standards		GB 4793.1-2007
EMC		EMC standard 89/336/EEC
		FCC Subpart B of Part 15 Class A
		IEC 1000-4-2/3/4/6
Mechanical parameters
Overall dimension (L x W x H) (mm)		410 x 250 x 300
Weight (kg)		≤10
Environmental conditions
Relative humidity		90RH%
Operating temperature		-10°C to +40°C
Altitude		≤2000m

FUNCTION 

I. Current Transformer (CT)	II. Voltage Transformer (PT)
1.  Magnetization curve	1.  Excitation characteristic test
2.  Transformation ratio test	2.  Transformation ratio test
3.  Polarity	3.  Polarity
4.  5% and 10% error curve	4.  Ratio error, phases
5.  Current Injecting	5.  Degauss
6.  Degauss	6.  Calculation of knee point value
7.  Ratio error, phases	7.  Actual secondary load (burden), test (burden)
8.  Automatic calculation of excitation knee point value	8.  Resistance test
9.  Actual secondary load test (burden) (load test)
10.  Resistance test
11.  Secondary winding time constant (Ts)
12.  Remanence coefficient (Kr)
13.  Transient dimensioning factor (Ktd)
14.  Peak instantaneous error (Er)
15.  Magnetizing inductance (LU)