3000A Cable Fault Analysis Clamp on Current Transformer

• Type: Electromagnetic
• Output Signal Type: Analog Output
• Production Process: Integration
• Material: Metal
• Accuracy Grade: 0.1G
• Application: Electrical Test Equipment
• Model NO.: Q125B
• IP Rating: IP20
• Certification: ISO
• Customized: Customized
• Name: 3000A Clamp on Current Transformer
• Color: Red & Blue
• Jaw: 120mm
• Ratio: 3000/1A, 3000/5A
• Weight: 1200g
• Materials: Nickel Metal Core
• Applications: Cable Fault Analysis
• Linear: 0.2%
• Transport Package: Standard Export Wooden Box
• Specification: 0.5%, 3000/5A
• Trademark: GFUVE
• Origin: Beijing China
• Production Capacity: 10000PCS/Month

Product Description

S120 3000A CABLE FAULT ANALYSIS CLAMP ON CURRENT TRANSFORMER

The S120 current clamp is a high performance AC Clamp on current transformer probe with excellent transformation and low phase shift. The high quality magnetic permalloy core and uniform windings provide for accurate measurements up to 3000AAC/2000AAC/1000AAC/500AAC. The "ring type" jaw permits good magnetic conduction and cable positionings. Provide excellent RMS capabilities and reliable signal reproduction.
The S120 clamp on ct is well suited for power quality applications where high accuracy and low phase shift along with wide frequency from 10Hz to 2MHz are important. Measurement range is 100mA to 3000A.
The S120 clamp on current transformer is a general purpose 3000A AC Clamp current probe transformer designed for use with DMMs & BNC, cable fault analysis and loggers instruments that have a current input. It has a 1000:1 or 2000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The S120 has an integral 2.5m or 5m lead terminated. The rounded jaw design on this clamp probe makes it well-suited for cable fault analysis applications where high accuracy and low phase shift and wide frequency.

APPLICATIONS

• Large industrial loads
• Measuring around cable bundles
• Power load monitoring
• Electrical utility
• HVAC
• Industrial maintenance
• Laboratory
• Plant maintenance
• Cable fault tester

FEATURES

• Measurement range of 1A to 3600A AC
• Large jaw opening designed
• Improved ergonomic design and easy operation
• Conforms to EN 61010, 600V CAT III
• Low phase shift for power measurement
• Nominal range: 1 to 1000AAC, 1 to 2000AAC, 1 to 3000AAC
• Transformation ratio: 1000:5, 2000:5, 3000:5
• Output:5mA AC/A AC, 2.5mA AC/A AC, 1.666mA AC/A AC
• Designed for use on DMMs, power and harmonic meters, recorders or instruments with AC current ranges
• UL, CE mark

PARAMETERS

Electrical parameters
Ratio	1000: 1 or 2000:1 (customized)
Accuracy class	0.2%, 0.5%, 1%
Primary current	0 - 3000A AC
Secondary current	0 - 5A AC (customized)
Max. Cont. Input current	3600A
Over voltage category	CAT III 600V
Output signal (AC current)	500mA,1A,2A,5A  AC at nominal input current
Electrical parameters - continued
Output signal (AC voltage)	333mV, 500mV, 1V, 5V AC at nominal input current
Frequency range	40Hz-2000Hz
Dielectric strength	3KV 50Hz/60Hz  at 1 minute
Temperature range	-20°C to +55°C
Output	2.5 meter cable with D01 connector
Max. voltage not insulated conductors	600 V
Standard	EN 61010-1, EN 61010-2-032, IEC60044-1
Installation	clamp type
Output mode	lead output(2.5m)
Mechanical parameters
Dimensions (L x W x H) (mm)	180 x 319 x 35
Weight (g)	1100
Holding wire diameter (mm)	φ125
Max. jaw opening (mm)	125
Color	Black
Material	PC+ABS+Polycarbonate, UL94 V0
Electrical parameters
Ratio	1000: 1 or 2000:1 (customized)
Accuracy class	0.2%, 0.5%, 1%
Primary current	0 - 3000A AC
Secondary current	0 - 5A AC (customized)
Max. Cont. Input current	3600A
Over voltage category	CAT III 600V
Output signal (AC current)	500mA,1A,2A,5A  AC at nominal input current
Electrical parameters - continued
Output signal (AC voltage)	333mV, 500mV, 1V, 5V AC at nominal input current
Frequency range	40Hz-2000Hz
Dielectric strength	3KV 50Hz/60Hz  at 1 minute
Temperature range	-20°C to +55°C
Output	2.5 meter cable with D01 connector
Max. voltage not insulated conductors	600 V
Standard	EN 61010-1, EN 61010-2-032, IEC60044-1
Installation	clamp type
Output mode	lead output(2.5m)
Mechanical parameters
Dimensions (L x W x H) (mm)	180 x 319 x 35
Weight (g)	1100
Holding wire diameter (mm)	φ125
Max. jaw opening (mm)	125
Color	Black
Material	PC+ABS+Polycarbonate, UL94 V0

Model	Rate Current	Max Current	Secondary Current	Coil Ratio	Burden Resistance	Accuracy
Q125B-500	500A	600A	5A	100:1	2.5VA	0.5%
Q125B-600	600A	720A	5A	120:1	2.5VA	0.5%
Q125B-800	800A	960A	5A	160:1	2.5VA	0.5%
Q125B-1000	1000A	1200A	5A	200:1	2.5VA	0.5%
Q125B-1200	1200A	1440A	5A	240:1	2.5VA	0.5%
Q125B-1500	1500A	1800A	5A	300:1	2.5VA	0.5%
Q125B-2000	2000A	2400A	5A	400:1	2.5VA	0.5%
Q125B-3000	3000A	3600A	5A	600:1	2.5VA	0.5%
Q125B-500	500A	600A	1A	500:1	customized	0.5%
Q125B-600	600A	720A	1A	600:1	customized	0.5%
Q125B-800	800A	960A	1A	800:1	customized	0.5%
Q125B-1000	1000A	1200A	1A	1000:1	customized	0.2%
Q125B-1200	1200A	1440A	1A	1200:1	customized	0.2%
Q125B-1500	1500A	1800A	1A	1500:1	customized	0.2%
Q125B-2000	2000A	2400A	1A	2000:1	customized	0.2%
Q125B-3000	3000A	3600A	1A	3000:1	customized	0.2%

http://guangfuhui.en.made-in-china.com