| Customization: | Available |
|---|---|
| Application: | Electronic, Instrument |
| Type: | Current Transformer |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The model XQ20 clamp on current sensor is suitable for 200A cable online measurement, the user friendly shape make It easily clamp onto cables or bus bars.
| Electrical parameters | |
|---|---|
| Ratio | 1000: 1 or 2000:1 (customized) |
| Accuracy class | 0.1%, 0.2% |
| Primary current | 0 - 200A AC |
| Secondary current | 0 - 200mA AC (customized) |
| Max. Cont. Input current | 240A |
| Load capacity | ≤4Ω |
| Over voltage category | CAT III 600V |
| Output signal (AC current) | From 0 to 200mA AC at nominal input current |
| Output signal (AC voltage) | From 0 to 2V AC at nominal input current |
| Frequency range | 40Hz-2000Hz |
| Dielectric strength | 3KV 50Hz/60Hz at 1minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 600 V |
| Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation | Clamp type |
| Output mode | Lead output(2.5m) |
| Mechanical parameters | |
| Dimensions (L x W x H) (mm) | 52.5 x 137.5 x 28 |
| Weight (g) | 400 |
| Holding wire diameter (mm) | φ20 |
| Max. jaw opening (mm) | 20 |
| Jaw color | Red, yellow, blue, green, black |
| Material | PC+ABS+Polycarbonate, UL94 V0 |
){kind=link}