P18 High Accuracy Multi range 10A/100A/1V Current Transformer clamp
The round jaw design on the P18 Series double ratio AC current clamp along with the high content permalloy core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important. Measurement range is 1mA to 200A.
The P18 AC current clamp is a general purpose 200A AC current clamp ct designed for use with DMMs, power loggers and energy meter calibration instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The P18 clamp ct has an integral 2.5m lead terminated. The rounded jaw design on this current clamp makes it well-suited for power applications where high accuracy 0.1% and low phase shift and wide frequency response are important.
Applications
· Power quality measuring
· Large industrial loads
· HVAC
· Measuring around cable bundles
· Power load monitoring
· Waveform analysis
Features
· Measurement range of 1mA to 200A AC
· Small, compact size
· Improved ergonomic design and easy operation
· Conforms to EN 61010, 600V CAT III
· Low phase shift for power measurement
· Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters
· With load capacity≤ 4
· Output model: Lead output(2.5m)
| Ratio |
1000: 1 or 2000:1 , customized |
| Nominal input current |
200 A |
| Max. Cont. Input current |
240 A |
| Accuracy |
0.1 %,0.2% |
| Over voltage category |
CAT III 600 V |
| Output signal |
200mA AC at nominal input current |
| Frequency range |
40 Hz....2000 Hz |
| Dielectric strength |
3000 V 50Hz/60Hz at 1 minute |
| Temperature range |
-20 °C...+55 °C |
| Output |
2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors |
600 V |
| Max. jaw opening |
20 mm |
| Standard |
EN 61010-1 |
| Dimensions |
52.5mm x 137.5mm x 28 mm |
| Weight |
400 g |
){kind=link}