Mv & Ma AC Current Clamp on Current Transformer 1000A

• Type: Electromagnetic
• Output Signal Type: Analog Output
• Production Process: Integration
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: S50
• Material: Permarlloy Core
• Accuracy Grade: 0.1G
• Application: Clamp on Current Sensor
• IP Rating: IP30
• Certification: ISO
• Customized: Customized
• Product Name: Clamp on Current Transformer
• Range: 0-1200A
• Ratio: 1000:1
• Standard: IEC/En61010-2-032, IEC60044-1
• Transport Package: Standard Export Box
• Specification: S50 1000a/1v class 0.1
• Trademark: GFUVE
• Origin: Beijing China
• Production Capacity: 20000PCS/Month
• Package Size: 33.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 2.000kg

Product Description

MV & MA OUTPUT AC CURRENT CLAMP ON CURRENT TRANSFORMER S50 1000A


The round jaw design on the S50 Series AC current clamp on CT along with the high content nickel metal core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important from 10Hz to 10MHz. Measurement range is 1mA to 1200A. The S50 is a general purpose 1200A AC current clamp on CT designed for use with DMMs, power loggers and energy meter calibration instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The S50 clamp on CT has an integral 2.5m lead terminated. The rounded jaw design on this current clamp makes it well-suited for power applications where high accuracy 0.1% and low phase shift and wide frequency response are important. 
 

APPLICATIONS

• Power quality analyzer(PQA)
• power and harmonic meters
• Phase angle meter
• Energy meter calibrator
• Measuring around cable bundles
• Power load monitoring
• Data logging/recording
• Waveform analysis(oscilloscopes meter)

 

FEATURES

• Measurement range of 1mA to 1200A AC
• Improved ergonomic design & easy operation
• High content permalloy core
• Frequency 10Hz-10MHz Bandwidth
• Holding wire diameter: φ52mm
• Conforms to EN 61010, 600V CAT III
• Low phase shift for power measurement
• Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters
• UL, CE mark

 

PARAMETERS

Electrical parameters
Ratio	1000: 1 , 2000:1, 1000:5 (customized)
Accuracy class	0.1%, 0.2%, 0.5%
Primary current	0 - 500A AC and 0-1000A AC
Signal output	1mV/A, 1mA/A
Secondary voltage	0 - 0.5V AC and  0 - 1V AC;
Secondary current	0-1A or 0-5A AC
Max. Cont. Input current	1200A
Load capacity	≤4Ω
Over voltage category	CAT III 600V
Frequency range	10Hz-10MHz
Dielectric strength	3KV 50Hz/60Hz  at 1minute
Temperature range	-40°C to +55°C
Output	2.5 meter cable with D01 or BNC connector
Max. voltage not insulated conductors	600 V
Standard	EN 61010-1, EN 61010-2-032, IEC60044-1
Installation	clamp type
Output mode	lead output(2.5m)
Accuracy (1000A Range)
0-10A	≤0.5%
10-100	≤0.2%
10-1200A	≤0.1%
Phase Shift(1000A Range)
0-10A	≤0.5°
10-100	≤0.2°
100-1200A	≤0.1°
Mechanical parameters
Dimensions (L x W x H) (mm)	105 x 218 x 30
Weight (g)	650
Holding wire diameter (mm)	φ52
Max. jaw opening (mm)	52
Jaw color	Red & Grey
Material	PC+ABS, UL94 V0

photo