Q8a2 AC Current Probe Permalloy Core 0.1% Used for Leakage Current Measurement

Product Description

Q8A2HIGH SENSITIVITY 0.1% PERMALLOY CORE 10A AC CURRENT CLAMP CT

Product Description

The model Q8A2 permalloy core ac current clamp ct with high accuracy up to 0.1% has been designed for use with energy meter tester, multimeters, recorders, power analyzers, safety testers etc. It has low phase shift for power measurement, greatly suitable for electric energy meter calibrator and oscilloscope. This Q8A2 clamp ct can convert 0 - 10A AC current to 0 - 10mA AC current with real shape, max 20A measurement, but with harmonic measurement function. It is suitable for leakage current measurement in the field.

PARAMETERS

Ratio	1000: 1, 2000:1 or 2500:1 (customized)
Accuracy class	0.1 %,0.2%
Primary current	0 - 5A AC, 0 - 10A AC, 0 - 20A AC
Secondary current	0 - 10mA AC or 0 - 100mV AC (customized)
Max. Cont. Input current	6A, 12A, 24A
Load capacity	≤20Ω , Standard 4Ω
Over voltage category	CAT III 600V
Output signal (AC current)	From 0 to 10mA AC at nominal input current
Output signal (AC voltage)	From 0 to 100mV AC at nominal input current
Signal ratio	1mA/A, 1mV/A, 10mV/A, 100mV/A
Frequency range	10Hz-200KHz
Dielectric strength	3KV 50Hz/60Hz at 1 minute
Temperature range	-20°C to +55°C
Output	2.5 meter cable with D01 connector
Max. voltage not insulated conductors	720 V
Standard	EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 600V CAT III
Installation	Clamp type
Output mode	Lead output (2.5m)
Connector	BNC, 4mm banana, Audio plug,customized

Functions

Power meter;
Digital multi-meter;
Energy sub-meters;
Phase angle meter;
Oscilloscopes meter;
Power quality analyzer;
Leakage current meter;
Data logging/recording;
Power quality monitoring;
Multi-function energy meter;
Power and harmonic meters;
CT secondary current detection;
Electricity meter calibrator (on site);

FEATURES

UL, CE, CNAS mark;
Holding wire diameter: φ8mm;
Frequency 10Hz-2MHz Bandwidth;
High times harmonic measurement;
Conforms to EN 61010, 600V CAT III;
Measurement range of 1mA to 20A AC;
Low phase shift for power measurement;
High content nickel metal permalloy core;
Min 1mA for leakage current measurement;
Improved ergonomic design & easy operation;
High precision 0.1% for current measurement;
Designed for DMMs, recorders, oscilloscopes, power meters etc;