Q50A 1000A/500ma output AEMC AC Clamp on Current Probe
The model Q50A 1000A High Precision ma output AEMC AC Clamp on Current Probe is designed for fast and easy measure the current in industrial and power environment, it has wide range of current measurement.
FEATURES
Suitable for 1000A cable online measurement
Holding wire diameter: φ50mm
Dimension: 101mm×219mm×26mm
Load capacity: mA output≤4Ω, 1A output 0.1Ω, 5A output 2.5VA
Installation: clamp type
Output mode: lead output
PARAMETERS
Electrical parameters |
Ratio |
1000: 1 or 2000:1 (customized) |
Accuracy class |
0.1%, 0.2%, 0.5% |
Primary current |
0 - 1000A AC |
Secondary current |
0 - 5A AC (customized) |
Max. Cont. Input current |
1200A |
Over voltage category |
CAT III 600V |
Output signal |
500mA,1A,5A AC at nominal input current |
Frequency range |
40Hz-2000Hz |
Dielectric strength |
3KV 50Hz/60Hz at 1 minute |
Temperature range |
-20°C to +55°C |
Output |
2.5 meter cable with D01 connector |
Max. voltage not insulated conductors |
600 V |
Standard |
EN 61010-1, EN 61010-2-032 |
Installation |
clamp type |
Output mode |
lead output(2.5m) |
Mechanical parameters |
Dimensions (L x W x H) (mm) |
101 x 219 x 26 |
Weight (g) |
550 |
Holding wire diameter (mm) |
φ50 |
Max. jaw opening (mm) |
50 |
PHOTO
http://guangfuhui.en.made-in-china.com