S120 Current Transformer Clamp Type AC 3000A Used with Dmms and BNC

• Customization: Available
• Type: Electromagnetic
• Output Signal Type: Digital Output
• Model NO.: S120
• Production Process: Integration
• Material: Metal
• Accuracy Grade: 0.1%, 0.2%, 0.5%
• Application: Used for Power Quality Analyzer
• IP Rating: IP67
• Certification: CE
• Customized: Customized
• Transport Package: Carton
• Specification: 1200g, 178*290*30mm
• Trademark: GFUVE, UL, CE, CNAS mark
• Origin: China
• Production Capacity: 50000 Pieces/Year

Product Description

S120 clamp on ct cable fault analysis 10Hz to 2MHz frequency range

Product Description

The S120 clamp on ct is well suited for power quality applications where high accuracy and low phase shift along with wide frequency from 10Hz to 2MHz are important. Measurement range is 100mA to 3000A.
The S120 clamp on current transformer is a general purpose 3000A AC clamp current probe transformer designed for use with DMMs & BNC, cable fault analysis and loggers instruments that have a current input. It has a 1000:1 or 2000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The S120 has an integral 2.5m or 5m lead terminated. The rounded jaw design on this clamp probe makes it well-suited for cable fault analysis applications where high accuracy and low phase shift and wide frequency.

Product Parameters

Ratio	1000:1, 2000:5 or 3000:5 (customized)
Accuracy class	0.1%, 0.2%, 0.5%
Primary current	0-3000A AC
Secondary current	0-1A or 0-5A AC (customized)
Secondary voltage	0-2V, 0-5V AC (customized)
Max. Cont. Input current	3600A
Load capacity	≤20Ω, standard 4Ω
Over voltage category	CAT III 600V
Output signal (AC current)	500mA, 1A, 2A, 5A AC at nominal input current
Output signal (AC voltage)	1V, 2V, 5V, 10V AC at nominal input current
Frequency range	10Hz-2MHz
Dielectric strength	3KV 50Hz/60Hz at 1 minute
Temperature range	-40°C to +55°C
Output	2.5 meter cable with D01 connector or BNC
Max. voltage not insulated conductors	600V
Standard	EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 600V CAT III
Installation	clamp type
Output mode	lead output(2.5m, 5m or 10m)
Connector	BNC, 4mm banana, signal cable (2 cores), customized
Range version	100A, 200A, 400A, 500A, 1000A, 2000A, 3000A
Accuracy (3000A range)
0-10A	≤0.5%
10-100	≤0.2%
100-3000A	≤0.1%

Functions and Features

Functions:
Power meter;
Cable fault analysis;
Large industrial loads;
Power load monitoring;
Data logging/recording;
Energy meter calibrator;
Power quality monitoring;
Power and harmonic meters;
Power quality analyzer (PQA);
CT secondary current detection;
Measuring around cable bundles;
Waveform analysis (oscilloscopes meter);

Features:
UL, CE CNAS mark;
Frequency 10-2MHz;
Holding wire diameter: φ120mm;
Conforms to EN 61010, 600V CAT III;
Low phase shift for power measurement;
Industrial design & beautiful appearance;
High content nickel metal permalloy core;
Measurement range of 1mA to 3000A AC;
Transformation ratio: 1000:1, 2000:5, 3000:5;
Improved ergonomic design & easy operation;
High precision 0.1% for current measurement;
Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters;